Here is how to program an minipov3 with USBASP
If you are on Windows you'll need USBASP drivers : http://www.fischl.de/usbasp/
I made a version of the firmware with a Makefile for USBasp
You don't have to modify the file as there is no need to set a port.
Here is the entire firmware in Github: https://github.com/maditnerd/miniPOV3/tree/usbasp
Here is a direct link to the Makefile : https://raw.githubusercontent.com/madit ... p/Makefile
This version also correct the warning message: (viewtopic.php?f=11&t=56802)
Wiring
Majsterkowo made great image on how to wire an attiny2313 to an USBASP
http://majsterkowo.pl/programowanie-mik ... ra-usbasp/
(The site is in polish but the image speaks by themself)
Programming minipov3 with USBASP
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
Please be positive and constructive with your questions and comments.