This is the front panel for the x0xb0x in Front Panel Express/Schaeffer format. This is mainly for those who are building a x0xb0x from scratch or are doing a custom version. This file may be all you need or it may be a nice starting point if you're doing mods. Please note the you will need their Front Panel software to view the file (although not necessarily to order one). In North America the link is http://www.frontpanelexpress.com In Europe go to http://www.schaeffer-ag.de Also please note that the panel in the file attached is indicated as 2mm thick. This is only because the software wouldn't let me choose 1.5mm. I called over and they said they can do the panel in 1.5mm so just make sure you tell them when you quote and order. It's not a big deal but the PacTec PT-10 was really designed to fit a 1.5mm panel. Download the file here
I've added the file for the rear panel here. Currently there are some extra panels for sale at Adafruit. I would advise buying one of those first if they're still available. It'll cost you $21 to machine a one-off at Front Panel Express while they are $15 on Adafruit.
x0xb0x Panel for Front Panel Express/Schaeffer link inside
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
-
- Posts: 587
- Joined: Thu May 25, 2006 1:30 am
-
- Posts: 1
- Joined: Mon Feb 10, 2014 12:02 am
Re: x0xb0x Panel for Front Panel Express/Schaeffer link insi
Very valuable, thanks much!
Please be positive and constructive with your questions and comments.