2SK30AO and 2SK30AY
Moderators: Altitude, adafruit_support_bill, adafruit, phono, mome rath

2SK30AO and 2SK30AY

by uj1000 on Wed Feb 27, 2013 2:13 pm

Hello, I was doing some mods to my XOX and noticed that 2SK30AO is on Q39 and 2SK30AY is on Q28. I think per the instructions the 2SK30AO is suppose to be in the VCO section and the 2SK30AY on the envelope section... Should I desolder and swap or does it not make much difference?

Posts: 1
Joined: Wed Feb 27, 2013 2:07 pm

Re: 2SK30AO and 2SK30AY

by antto on Wed Feb 27, 2013 6:43 pm

it shouldn't matter unless it sounds terribly wrong at the end (i doubt that)
but if you're willing to desolder them - maybe just put sockets so you can swap em later if you change your mind :wink:
We are here too: irc.freenode.net >>> #x0xb0x
..:: c0nb0x v1.00 ::.. http://forums.adafruit.com/viewtopic.php?f=7&t=29282 (new control app - win/osx)
VCO Tuning: http://forums.adafruit.com/viewtopic.php?f=12&t=24759 (do it the EASY way)
User avatar
Posts: 1416
Joined: Thu Apr 15, 2010 3:21 pm