I have only now went through my box and checked all resistors (why didn't I do this in the beginning :oops: ) and have found a few that are potentially wrong/faulty but would appreciate some help....
All resistance values have been tested in-situ, and initially I thought there were some issues around R74-90 but remembered that quite a few are in parallel, so give 100k readings rather than 200K. So...
....are there any other places where resistors are effectively in parallel and so will give a measurement that is different from the BOM? :?: :?:
Other than that there are a few discrepancies:
R64, R65, R109, R112, R116 - should be 10k but measuring 6.8 or 7.4K. Are these withing acceptable limits or worth swapping?
R60 (22k) - actual reading 17.6K. Again, not miles away but more than 5%
R63 (220k) - actual reading 60k
R102 (100k) - 70k
R103 (220k) - 75k
R105 (10k) - 2.9k
R118 (100k) - 13k
R128 (220k) - 52k
I will swap the above, but are any more important than others in terms of the overall sound?