I just finished soldering the last components of my x0xb0x. The keyboard seems doing the opposite as requested: a sound is heard when nothing is pressed, while pressing keys will silent the sound. Only when accent is selected are the keys functioning in the right way (but with accent). What is wrong, what should it measure/test?
While building I did all the tests listed in the willzyx build guide and everything worked as described for the analog section.
Thank you for your help.
Romain
Inverse Gate/envelope?
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: Inverse Gate/envelope?
hm...
measure the gate voltage as it comes out of the cpu - at R146, both when a note is supposed to be played and when there should be no note
measure the gate voltage as it comes out of the cpu - at R146, both when a note is supposed to be played and when there should be no note
- XoXo
- Posts: 4
- Joined: Tue Aug 19, 2014 4:07 pm
Re: Inverse Gate/envelope?
Dear Antto,
I have about 12mV when nothing pressed BEFORE R146 and 4.9V when pressing a music key. Look like the Eagle ref voltage and what I can expect a gate signal to be.
Best regards,
Romain
I have about 12mV when nothing pressed BEFORE R146 and 4.9V when pressing a music key. Look like the Eagle ref voltage and what I can expect a gate signal to be.
Best regards,
Romain
- XoXo
- Posts: 4
- Joined: Tue Aug 19, 2014 4:07 pm
Re: Inverse Gate/envelope?
Oops, I just found that I soldered Q31 the other way round... this may explain that... Now I have to reverse it!
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: Inverse Gate/envelope?
Q31 is on the output of the volume envelope... so very likely
- XoXo
- Posts: 4
- Joined: Tue Aug 19, 2014 4:07 pm
Re: Inverse Gate/envelope?
Works perfectly, thank you Antto...
Best regards,
Romain
Best regards,
Romain
Please be positive and constructive with your questions and comments.