Hi there,
complete novice here.
everything has been going smashingly, perfect results with each test thus far.
have finished the envelope section. when conducting the test at d35 I get 11.75 volts, when I disconnect the clip it remains at this instead of dropping to zero. No result whatsoever from testing d36.
Have triple checked all components. actually make that quadruple checked. everything is in the right way with the right values. have i possibly blown something?
Cheers for any help.
First time x0xing. Constant signal from r146 during envelope
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- cuznmatt
- Posts: 5
- Joined: Wed Aug 27, 2014 8:12 am
- Terrakroma
- Posts: 9
- Joined: Tue Aug 19, 2014 7:38 pm
Re: First time x0xing. Constant signal from r146 during enve
Same thing happened to me. My envelops are fine:)
- cuznmatt
- Posts: 5
- Joined: Wed Aug 27, 2014 8:12 am
Re: First time x0xing. Constant signal from r146 during enve
So just proceed?
- altitude
- Posts: 995
- Joined: Wed May 11, 2005 5:17 pm
Re: First time x0xing. Constant signal from r146 during enve
I dont think that part will work correctly without the digital section to trigger it so proceed
- cuznmatt
- Posts: 5
- Joined: Wed Aug 27, 2014 8:12 am
Re: First time x0xing. Constant signal from r146 during enve
Cool, I moved along, up to the sequencer. Fun times ahead. I/O board done, mixer done.
Thanks for the advice.
Thanks for the advice.
Please be positive and constructive with your questions and comments.