New CPU Project
Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers
Please be positive and constructive with your questions and comments.
- computer controlled
- Posts: 714
- Joined: Fri May 06, 2005 5:48 pm
Re: New CPU Project
So, uh... what does this new CPU do exactly? Looking through the thread, i see no info about this.
- altitude
- Posts: 995
- Joined: Wed May 11, 2005 5:17 pm
Re: New CPU Project
more code space, way more pins. The firmware as it is pretty much uses up all the available space in the mega162
- computer controlled
- Posts: 714
- Joined: Fri May 06, 2005 5:48 pm
Re: New CPU Project
I guess i don't see a need for more code space? Better OS?
Probably not for me =o]
Probably not for me =o]
-
- Posts: 3155
- Joined: Fri Feb 17, 2006 5:35 am
Re: New CPU Project
its for people who want to write new code
and eventually after that code is written
it will be for people who want to use that code
it also has more pins
so you can connect more stuff up to it
like extra mod knobs to the processor
and eventually after that code is written
it will be for people who want to use that code
it also has more pins
so you can connect more stuff up to it
like extra mod knobs to the processor
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: New CPU Project
well the main feature is more code space for bigger firmware
i don't know what the "more pins" can do but i got some ideas
if it's possible maybe the cutoff / reso / envmod / decay / accent pots can be hooked up to the CPU (via DACs i guess) and controlled from your DAW as MIDI CC
but i'm just talking nonsense ;]
i don't know what the "more pins" can do but i got some ideas
if it's possible maybe the cutoff / reso / envmod / decay / accent pots can be hooked up to the CPU (via DACs i guess) and controlled from your DAW as MIDI CC
but i'm just talking nonsense ;]
- altitude
- Posts: 995
- Joined: Wed May 11, 2005 5:17 pm
Re: New CPU Project
I have my proto board programmed successfully via ISP (thnx guest). Unfortunately, I have a header on my board for the ribbon so might be a sec before I get the new board fitted and fully tested..
-
- Posts: 3155
- Joined: Fri Feb 17, 2006 5:35 am
Re: New CPU Project
yeah its pretty tight above the cable
i didnt use headers
so i could just smash it all down
i didnt use headers
so i could just smash it all down
-
- Posts: 3
- Joined: Sun Oct 09, 2011 10:30 am
Re: New CPU Project
whats the latest on this project ?
Its a long time since there has been any posts...
Its a long time since there has been any posts...
-
- Posts: 146
- Joined: Thu Oct 30, 2008 9:00 am
Re: New CPU Project
I think that this project is dead ...
- rv0
- Posts: 395
- Joined: Tue Jul 14, 2009 4:50 pm
Re: New CPU Project
Anyone know what happened to textile / somaticcircuits.com?
- indigenous
- Posts: 14
- Joined: Sat Dec 05, 2009 5:11 pm
Re: New CPU Project
I had a similar question...
I hope nothing serious/fatal has happened.
I hope nothing serious/fatal has happened.
-
- Posts: 208
- Joined: Wed Sep 19, 2012 8:11 am
Re: New CPU Project
http://somaticcircuits.net/
Vx - x0xb0x CPU upgrade.
Upgrade your x0xb0x with this plug and play
daughter baord. Loaded with the standard
x0xb0x.hex firmware or the arduino variation.
Code your dream sequencer.
In stock - october 2012 contact
Someone should contact him there and find out what`s going on. An` put me on the list of people that want one:)
Vx - x0xb0x CPU upgrade.
Upgrade your x0xb0x with this plug and play
daughter baord. Loaded with the standard
x0xb0x.hex firmware or the arduino variation.
Code your dream sequencer.
In stock - october 2012 contact
Someone should contact him there and find out what`s going on. An` put me on the list of people that want one:)
- antto
- Posts: 1636
- Joined: Thu Apr 15, 2010 3:21 pm
Re: New CPU Project
i contacted textile, it seems it's true
CPU MOD IS HERE!
CPU MOD IS HERE!
-
- Posts: 16
- Joined: Sun Nov 11, 2012 8:55 am
Re: New CPU Project
antto, did you get a price from him? it's not on the shop page.
more memory would help my dual sequencer idea become possible without any compromises
more memory would help my dual sequencer idea become possible without any compromises
Please be positive and constructive with your questions and comments.