Problem with continuous soudn when sequencer is stopped

Discuss mods, hacks, tweaks, etc.

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Locked
x0xBuilder
 
Posts: 35
Joined: Wed Feb 25, 2009 6:10 am

Problem with continuous soudn when sequencer is stopped

Post by x0xBuilder »

Hi,
i've a got problem with x0xi0, when i use it with in pattern mode when i stop it, sometimes a continuous sound is still present, i restart it and stop it and sound is stopping !
Do you have an idea when it comes ? i never had this problem before.
Thanks for your help !

User avatar
antto
 
Posts: 1636
Joined: Thu Apr 15, 2010 3:21 pm

Re: Problem with continuous soudn when sequencer is stopped

Post by antto »

i believe the x0xi0 has these gate-on-forever and/or other VCA hacks, check those
other than that, it could be a firmware issue or analogue problem

User avatar
mmm
 
Posts: 517
Joined: Tue Apr 24, 2012 1:51 am

Re: Problem with continuous soudn when sequencer is stopped

Post by mmm »

x0xBuilder wrote:Hi,
i've a got problem with x0xi0, when i use it with in pattern mode when i stop it, sometimes a continuous sound is still present, i restart it and stop it and sound is stopping !
Do you have an idea when it comes ? i never had this problem before.
Thanks for your help !
Are you sure this is a x0xi0 problem? I've experience similar behaviour with a couple of stock xoxboxes. The "continuous sound" happened when stopping the pattern while an accented note was playing. Q39 was the culprit.

x0xBuilder
 
Posts: 35
Joined: Wed Feb 25, 2009 6:10 am

Re: Problem with continuous soudn when sequencer is stopped

Post by x0xBuilder »

Hi Guys,
thanks a lot for your help, MMM you're absolutly right, when i cut accent, continuous sound is disapear. Now it's time to check Q39 and decay accent mode.
Thanks again, i will let you know.

x0xBuilder
 
Posts: 35
Joined: Wed Feb 25, 2009 6:10 am

Re: Problem with continuous soudn when sequencer is stopped

Post by x0xBuilder »

Ok problem fixed with Q39 replacement, thanks again !!

Locked
Please be positive and constructive with your questions and comments.

Return to “x0xm0dz”