Aluminum Case for your x0xb0x .: Revisited :.

Discuss mods, hacks, tweaks, etc.

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
kartoshka
 
Posts: 32
Joined: Thu May 08, 2008 1:54 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by kartoshka »

[Kartoshka x 1 xoxio_mod]

Robert, please post your actual graphics layout.

User avatar
computer controlled
 
Posts: 714
Joined: Fri May 06, 2005 5:48 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by computer controlled »

Well, if the price is reasonable, i'm down for for 1 bcbox mod case

[computer controlled x 1 bcbox case]

User avatar
robert lowell
 
Posts: 92
Joined: Wed Nov 02, 2005 9:28 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by robert lowell »

i'm going to look into another alternative that might solve all problems with different mods, etc. let me look into a few things this week and get back to everyone on the forum.

User avatar
kitsch-bent
 
Posts: 1
Joined: Wed Oct 15, 2008 3:17 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by kitsch-bent »

[ kitsch-bent x2 - bcbox i/o mod ]

NV
 
Posts: 21
Joined: Wed Apr 30, 2008 7:47 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by NV »

[ NV x1 - bcbox I/O Mod ]


I would also be interested in seeing a layout of the front panel graphics whenever you settle upon a design.

User avatar
robert lowell
 
Posts: 92
Joined: Wed Nov 02, 2005 9:28 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by robert lowell »

there is an overwhelming draw for the bcbox i/o mod... who of those that wanted that would like to see the full modded case??? if there are enough people interested i am going to go ahead and bug brian for the files for the control panel mod...

User avatar
subatomic
 
Posts: 523
Joined: Wed May 11, 2005 3:12 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by subatomic »

I'd especially be interested, if I could buy your case _instead_ of brian's panels (save some cash)... but yeah, bcbox front&i/o mods for me. :)

charlie_says
 
Posts: 214
Joined: Sat Jul 15, 2006 7:33 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by charlie_says »

I too was intending to do the full bcbox mod, so I should probably go for the front as well...

NV
 
Posts: 21
Joined: Wed Apr 30, 2008 7:47 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by NV »

I would personally prefer only the x0xi0 rear mod or no mods at all so that I could just drill my own holes or epoxy on a different front or rear panel if I decide to install anything. I think the entire mod kit seems very interesting, but it is a good deal of money and one of the things that actually drew me to the x0xb0x was its rather straight forward simplicity, as well as the affordable price for a streamlined synthesizer.

I feel like you can always drill extra holes for any mods you may plan or ignore vacant holes on the backside, but filling or covering already existing holes on the front faceplate is not as simple. I may be in the minority though.

alex_dubinsky
 
Posts: 188
Joined: Wed Jul 30, 2008 5:17 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by alex_dubinsky »

So, two weeks on, is there any clearer timeline for this thing?

User avatar
robert lowell
 
Posts: 92
Joined: Wed Nov 02, 2005 9:28 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by robert lowell »

as of yet the time line is no where closer then where i started. i am getting a quote for the case with only the i/o mod since we have about 20+ or so people that would want that. i will post another quote once i have received it from the manufacturer.

also here is a design i made for one of my xoxbox's a while back... it would be similar to this but not exactly sure on logos and what have you, this is just to get a general idea. i figured some feedback from others might be cool to incorporate into it as well. so let me know... :D


Image

User avatar
computer controlled
 
Posts: 714
Joined: Fri May 06, 2005 5:48 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by computer controlled »

I like how that looks! =o]

alex_dubinsky
 
Posts: 188
Joined: Wed Jul 30, 2008 5:17 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by alex_dubinsky »

Watch out. The white keys shouldn't swallow up the black keys like that on the top.

eil
 
Posts: 440
Joined: Sun Aug 31, 2008 11:09 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by eil »

Is that a transparent overlay? I was thinking of doing something similar but I'm not sure if I can run transparencies through my laser printer.

User avatar
robert lowell
 
Posts: 92
Joined: Wed Nov 02, 2005 9:28 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Post by robert lowell »

>> UPDate on the First Page too... >>

BcBox I/O Mod x0xb0x case
------------------------------------------

1 color - x25 = $96.99 each

2 color - x25 = $105.00 each

------------------------------------------


eil wrote:Is that a transparent overlay? I was thinking of doing something similar but I'm not sure if I can run transparencies through my laser printer.

Yes it is... I made it with clear vinyl and a BANNED feel laminate.

Locked
Please be positive and constructive with your questions and comments.

Return to “x0xm0dz”