Aluminum Case for your x0xb0x .: Revisited :.

Discuss mods, hacks, tweaks, etc.

Moderators: Altitude, adafruit_support_bill, adafruit, phono, mome rath

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby rarara » Thu Oct 30, 2008 4:09 am

hi robert,

can you just clarify a few of things please. is the silver/black image you posted classed as 1 colour? in that case what does 2 colour look like? are the front/back/underside all brushed aluminium? and finally, you originally mention wooden templates for the sides are included, but then say we can choose the wood and colour ourselves - does it actually include the wooden sides themselves?

thanks

derek
rarara
 
Posts: 159
Joined: Wed Apr 05, 2006 8:47 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby robert lowell » Thu Oct 30, 2008 11:25 am

rarara wrote:hi robert,

can you just clarify a few of things please. is the silver/black image you posted classed as 1 colour? in that case what does 2 colour look like? are the front/back/underside all brushed aluminium? and finally, you originally mention wooden templates for the sides are included, but then say we can choose the wood and colour ourselves - does it actually include the wooden sides themselves?

thanks

derek



no problem derek,

*the image that i posted would be considered a 1 color because its only black on the aluminum. a two color would just have another color added to the existing one color... (white is not a color and cannot be used)

*yes its all natural aluminum on all sides and as for the wood templates they are just stickers that have the template of the enclosure opening on the sides. you will put the sticker on the wood and trace it out and cut with your choice of wood and then stain them whatever color you want.

hope that helps clear up some stuff for you.


thanks,

lowell
User avatar
robert lowell
 
Posts: 92
Joined: Wed Nov 02, 2005 8:28 pm
Location: michigan

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby rarara » Fri Oct 31, 2008 4:04 am

robert lowell wrote:
*yes its all natural aluminum on all sides and as for the wood templates they are just stickers that have the template of the enclosure opening on the sides. you will put the sticker on the wood and trace it out and cut with your choice of wood and then stain them whatever color you want.



hi robert,

thanks for that, but can you explain a little/add pics of the wooden sides. what sized pieces of wood are required, and then what is needed to get them to fit - just a saw? a router? i imagined that the sides would be recessed in some way? how are they then attached to the unit? i don't want a nice aluminium case spoiled by my poor attempts at carpentry!

thanks

derek
rarara
 
Posts: 159
Joined: Wed Apr 05, 2006 8:47 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby kroutshev » Sat Nov 01, 2008 11:16 am

Hi Robert !
[ kroutshev x2 - bcbox i/o mod ] one box
[ kroutshev x2 - bcbox full mod ] one box, please.
Very brilliant stuff but can you show how mount the wood templates and if it's possible to deal with bcbox to ship together i/o mods and boxes. I don't know if it's possible ??
I'm living in France.

Thanks.
B
Last edited by kroutshev on Wed Nov 12, 2008 9:36 am, edited 1 time in total.
kroutshev
 
Posts: 145
Joined: Thu Oct 30, 2008 8:00 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby benbrush » Sun Nov 02, 2008 9:07 am

Hi Robert,

benbrush x1 bcbox full mod.

Thanks.

if it's possible to also send the case to Brian so that I can get everything in one shot, thus saving shipping costs...(I live in Belgium)

Best regards

Ben
benbrush
 
Posts: 6
Joined: Sun Nov 02, 2008 8:58 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby RETALI8 » Thu Nov 13, 2008 7:59 pm

If it looks like that top mockup i'm interested..
TR808, TR606, Xbase 09, Jupiter 6, SH101, Juno 106, Alpha Juno 2, Matrix 6r, DX7, MS2000R, JP8080
RETALI8 STILL KILLS THE OLD WAY | Cold Crush electro funk
User avatar
RETALI8
 
Posts: 6
Joined: Wed Nov 12, 2008 10:28 pm
Location: Sydney

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby XeNoN23 » Fri Nov 14, 2008 3:41 am

Hi Robert,

XeNoN23 x1 bcbox full mod

Full mod case would be so great... :)

Great design btw....can´t wait!!!Thx for all the work!!!

cheers
Last edited by XeNoN23 on Mon Dec 15, 2008 1:23 pm, edited 1 time in total.
XeNoN23
 
Posts: 24
Joined: Mon Jan 07, 2008 9:36 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby klaymen333 » Tue Nov 18, 2008 9:59 am

havnt had any updates recently
will they make you a prototype before making the batch?
klaymen333
 
Posts: 2
Joined: Sun Sep 14, 2008 2:02 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby Malekko » Tue Nov 25, 2008 9:25 pm

malekko in for 2 full bcbox mods
:D
Malekko
 
Posts: 3
Joined: Tue Nov 25, 2008 2:26 pm

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby rarara » Sun Mar 22, 2009 12:20 pm

is this a complete non-starter?
rarara
 
Posts: 159
Joined: Wed Apr 05, 2006 8:47 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby hyphen nation » Tue Mar 24, 2009 1:21 am

yeah, if this didn't die in the water, I'd be into one of each...
User avatar
hyphen nation
 
Posts: 27
Joined: Wed Dec 31, 2008 12:53 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby datasheet » Sun Sep 06, 2009 8:11 am

robert lowell wrote:.:introducing the xcasex x0xb0x concept case... I've put some time in doing the legwork and have gotten a quote on producing some custom aluminum x0xb0x cases. Graphics will be 2 color Black/Red and will resemble the design below the concept. Its completly designed and ready to be produced. Its now up to you users for some input and try and make this happen...

Image
Image
Image

.:attn ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::: x0x'ers again...


Why:.

.:Many reasons and counting....Because that stock case just isn't gig worthy. Also moding
is a pain. With my case there would be extra room for additional pots & other mods
(excuse the lowsy photochop, not shown in picture concept.) It would look absolutely phenomenal.
Simply put, the x0xb0x deserves a better case!!! Also an on/off switch hole placement
will be pre-cut in the design as well. Sturdy .063 aluminum construction for a heavy feel.


Installation:.

.:Simply you would take your pcbs out of the stock case and bolt them to
the new case. (A little moding with different sized standoffs for the top pcb
might be the most you'd have to do.)


* Case would include ------------------------------------------------------------

x1 : .063 (previously quoted .040) Aluminum Case with 2 color satin finish graphics on natural aluminum with removable bottom plate

x1 : (L & R) Wood Side Templates - (This way user saves cost on shipping & can use any type of wood and stain whatever color wanted )

x1 : mini on/off switch

x1 : set of hardware to mount wood sides and bottom removable cover



Cost??? Cost would depend on how many people would be interested in the case...
The more people interested the more of a possibility that this will become a reality + cheaper the case will become.

Below is a Price Breakdown for Stock Case...
-------------------------------------------
x5 = $199.00 each

x10 = $128.75 each

x25 = $95.00 each

x50 = $75.50 each

x100 = $65.95 each

------------------------------------------

BcBox I/O Mod x0xb0x case
------------------------------------------

1 color - x25 = $96.99 each

2 color - x25 = $105.00 each


------------------------------------------


+ Projected Time frame: I'd like to see how much interest I get before nailing that down but its a 2-3 week lead time for them to manufacture the cases.


*does not include shipping costs those tbd by where you live.



If your interested post your user name & how many you'd like total and i will keep track on this first page. (ie: [ robert lowell x2 - stock ] or [ robert lowell x2 - bcbox i/o mod ])

STOCK---------------------------------

[ loydmilligan x2 ]
[ Goldope x1 ]
[ Matrix12 x1 ]

Total x4

BCBOX I/O MOD-------------------------

[ robert lowell x2 ]
[ Computer Controlled x1 ]
[ toxaco x1 ]
[ bcbox x2]
[ rarara x1 ]
[ charlie_says x1 ]
[ stevenclements x2 ]
[subatomic x1 ]
[ alex_dubinsky x 2 ]
[ crx091081gb x 1]
[ klaymen333 x 3 ]
[ lukas412 x1 ]
[ kitsch-bent x2 ]


Total x20



Hi Robert,have you any news for me about your aluminium case projet for x0xb0x please?
best regards
Raf
datasheet
 
Posts: 1
Joined: Sun Sep 06, 2009 8:06 am

Re: Aluminum Case for your x0xb0x .: Revisited :.

Postby netpusher » Fri Feb 19, 2010 12:19 am

Well, looks like this may have died, but just in case...
Sign me up for the bcboxio case.
netpusher
 
Posts: 9
Joined: Thu Oct 15, 2009 3:04 pm

Previous

Return to x0xm0dz

Who is online

Users browsing this forum: No registered users and 2 guests

Stuff to buy from the Adafruit store and links to product documentation!


New Products [103]

Raspberry Pi[80]
 
FLORA[23]
 
Bunnie Studios[9]
 
FPGA[1]
 
mbed[11]
Arduino[60]
 
NETduino[14]
 
BeagleBone[24]
 
Android[6]
 
XBee[10]
More Dev Boards[30]


 
BoArduino[8]
 
SpokePOV[4]
 
TV-B-Gone[4]
 
MiniPOV[3]
 
SIM reader[3]
 
Microtouch[5]
 
Clocks & Watches[18]
 
Drawdio[4]
 
Brain Machine[1]
 
Game of Life[2]
 
MintyBoost[2]
More DIY Kits[16]


 
MaKey MaKey[3]
 
Tweet-a-Watt[5]
 
Young Engineers[33]
 
Discover Electronics[2]
 
Snap Circuits[4]
 
littleBits[3]
 
Project packs[8]


 
Breakout Boards[33]
LCDs & Displays[48]
Components & Parts[69]
Batteries & Power[49]
EL Wire/Tape/Panel[52]
LEDs[109]
 
Wireless[14]
Cables[61]
 
Lasers[6]
Sensors/Parts[145]
 
Enclosures/Cases[11]
 
Solar[11]
 
RFID / NFC[13]
Prototyping[70]
 
iDevices[13]
Tools[71]
 
Wearables[39]
 
CNC[37]
 
Robotics[29]
 
3D printing[1]
 
Materials[24]


 
Stickers[41]
 
Skill badges[55]
 
Books[25]
 
Circuit Playground[7]
 
Gift Certificates[4]