doing a lot of tests with my up and running midisense.
i am still troubleshooting this issue, but i am having a hard time sending midi info from my midisense to a piece of equipment other than my computer. i am attempting to send midi to my mpc1000 and for some reason it is not reading the incoming data at all.
any ideas? i dread hearing that midisense only sends to a computer, but that can't be the case.
another issue solved (feel free to delete)
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 76
- Joined: Sun Feb 04, 2007 9:47 pm
another issue solved (feel free to delete)
Last edited by nym on Thu Mar 06, 2008 6:01 pm, edited 1 time in total.
-
- Posts: 76
- Joined: Sun Feb 04, 2007 9:47 pm
more information.
i connected midisense to midiox via my usb-midi cable.
i attached a rotary potentiometer to analog input 5, cc 74 (brightness).
tweaking the rotary works: i can assign the cc in Reaper and Reason.
in midi ox, there is evidence of the cc being tweaked. all is well there.
i then detach midisense from the usb-midi cable and plug my mpc into my usb-midi cable instead. hitting pads shows notes and aftertouch messages in midi ox. all is well there, too.
now, using a regular midi cable, i connect the OUT from midisense to the IN of the mpc. tweaking the rotary makes the midi activity light flash green. however, no midi data is recorded/seen by the MPC.
this is unlike my midi keyboard, which has sliders/knobs. these send recordable midi ccs to the mpc.
now wih more details, any ideas?
i connected midisense to midiox via my usb-midi cable.
i attached a rotary potentiometer to analog input 5, cc 74 (brightness).
tweaking the rotary works: i can assign the cc in Reaper and Reason.
in midi ox, there is evidence of the cc being tweaked. all is well there.
i then detach midisense from the usb-midi cable and plug my mpc into my usb-midi cable instead. hitting pads shows notes and aftertouch messages in midi ox. all is well there, too.
now, using a regular midi cable, i connect the OUT from midisense to the IN of the mpc. tweaking the rotary makes the midi activity light flash green. however, no midi data is recorded/seen by the MPC.
this is unlike my midi keyboard, which has sliders/knobs. these send recordable midi ccs to the mpc.
now wih more details, any ideas?
Please be positive and constructive with your questions and comments.