Low current Output, whats the problem?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Teckky
- Posts: 4
- Joined: Mon Nov 24, 2014 9:04 pm
Low current Output, whats the problem?
I just built a mintyboost on a breadboard. For some reason im only getting an output of around 30mA. I dont get the 500mA output unless i crank my voltage up to 5.8v (im using a dc power supply). I ordered the exact parts that are on the mintyboost parts list. Has anyone ran into this problem? Here is the picture of my breadboard, I know its all over the place. lol
- Attachments
-
- rsz_imag1009.jpg (273.69 KiB) Viewed 1576 times
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: Low current Output, whats the problem?
Many people have run into this problem. Ladyada discusses this issue in the FAQ
https://learn.adafruit.com/minty-boost/f-dot-a-q
https://learn.adafruit.com/minty-boost/f-dot-a-q
I'm trying to make/breadboard this kit on my own and it's not working! HELP ME!
It is pretty much impossible to get good ouput from the kit if it is breadboarded. A custom PCB or proper perf-board is essential. Most components cannot be swapped, and must be used as indicated, even if they're difficult to find in your area. All documentation is on the site.
I can't provide any support or help to 'DIYer's because of the time and difficulty in debugging these projects. Please endeavor to work out your project on your own.
Please be positive and constructive with your questions and comments.