--Trash-
Moderators: adafruit_support_bill, adafruit

--Trash-

by alanbrit on Tue Jul 12, 2011 5:08 pm

ALL GONE. THANKS
Attachments
wb.jpg
wb.jpg (182.19 KiB) Viewed 2888 times
Last edited by alanbrit on Wed Aug 24, 2011 2:18 am, edited 1 time in total.
alanbrit
 
Posts: 7
Joined: Thu May 03, 2007 6:48 pm

Re: Brand New Wavebubble Boards $15/Set

by Chankster on Tue Jul 12, 2011 5:35 pm

You're welcome for the image.
"This is not my sig", it said. - I looked at it suspiciously; Who's sig was it, then?
User avatar
Chankster
 
Posts: 121
Joined: Mon Jul 06, 2009 12:59 am

Re: Brand New Wavebubble Boards $15/Set

by alanbrit on Tue Jul 12, 2011 6:12 pm

Chankster wrote:You're welcome for the image.


Hey Thanks man! I got the same ones :)
alanbrit
 
Posts: 7
Joined: Thu May 03, 2007 6:48 pm

Re: Brand New Wavebubble Boards $15/Set

by alanbrit on Thu Jul 21, 2011 12:19 am

First batch shipped out with lots of bonus goodies! Still got TONS of boards.
alanbrit
 
Posts: 7
Joined: Thu May 03, 2007 6:48 pm

Re: Brand New Wavebubble Boards $15/Set

by lcstyle on Fri Jul 22, 2011 1:47 pm

alanbrit wrote:First batch shipped out with lots of bonus goodies! Still got TONS of boards.


Are you aware of any shorts on your boards?

--Ron
Let’s put a smile on that face!

lcstyle
 
Posts: 72
Joined: Sun Oct 26, 2008 10:55 am

Re: Brand New Wavebubble Boards $15/Set

by alanbrit on Fri Jul 22, 2011 8:58 pm

Lcstyle wrote:
alanbrit wrote:First batch shipped out with lots of bonus goodies! Still got TONS of boards.


Are you aware of any shorts on your boards?

--Ron


No sir. I've built 3 working wavebubble(s) within the past year and a half (and thrown out an additional 5 due to my own ignorance/stupidity/mistakes) with these same boards.

Thanks
alanbrit
 
Posts: 7
Joined: Thu May 03, 2007 6:48 pm

Re: Brand New Wavebubble Boards $15/Set

by lcstyle on Thu Jul 28, 2011 12:48 am

alanbrit wrote:
Lcstyle wrote:
alanbrit wrote:First batch shipped out with lots of bonus goodies! Still got TONS of boards.


Are you aware of any shorts on your boards?

--Ron


No sir. I've built 3 working wavebubble(s) within the past year and a half (and thrown out an additional 5 due to my own ignorance/stupidity/mistakes) with these same boards.

Thanks


So if you have made 3 full working wavebubbles how did you place R43 and R45, your boards are missing the traces for these two resistors for VCO2.

Your PCB's don't match with the original Mictronics design shown in this thread:
viewtopic.php?f=16&t=14782
You can clearly see traces for r43 and r45 appearing in the pictures there.

See here for more information:
viewtopic.php?f=16&t=22158&p=116339#p116339
Let’s put a smile on that face!

lcstyle
 
Posts: 72
Joined: Sun Oct 26, 2008 10:55 am

Re: Brand New Wavebubble Boards $15/Set

by alanbrit on Thu Jul 28, 2011 8:12 am

Lcstyle wrote:
So if you have made 3 full working wavebubbles how did you place R43 and R45, your boards are missing the traces for these two resistors for VCO2.

Your PCB's don't match with the original Mictronics design shown in this thread:
viewtopic.php?f=16&t=14782
You can clearly see traces for r43 and r45 appearing in the pictures there.

See here for more information:
viewtopic.php?f=16&t=22158&p=116339#p116339


Negative. The picture above is a reflection of the boards of Chankster. r43 and r45 traces are fully visible on my boards. People who received them can confirm.
alanbrit
 
Posts: 7
Joined: Thu May 03, 2007 6:48 pm

Re: Brand New Wavebubble Boards $15/Set

by lcstyle on Thu Jul 28, 2011 10:17 am

alanbrit wrote:
Lcstyle wrote:
Negative. The picture above is a reflection of the boards of Chankster. r43 and r45 traces are fully visible on my boards. People who received them can confirm.


I would think if you have these boards, why not just post a new picture and show us the traces?
Let’s put a smile on that face!

lcstyle
 
Posts: 72
Joined: Sun Oct 26, 2008 10:55 am

Re: --Trash-

by tony18183 on Mon Dec 19, 2011 11:49 pm

Hi,

Still got any board left in stock.

I am interested in buying one set. contact me tony18183@hotmail.com


thanks
tony18183
 
Posts: 28
Joined: Mon Dec 19, 2011 11:19 pm