WB2010b Sub Part Question

The operation of transmitters designed to jam or block wireless communications is a violation of the Communications Act of 1934, as amended ("Act"). See 47 U.S.C. Sections 301, 302a, 333. The Act prohibits any person from willfully or maliciously interfering with the radio communications of any station licensed or authorized under the Act or operated by the U.S. government. 47 U.S.C. Section 333. The manufacture, importation, sale or offer for sale, including advertising, of devices designed to block or jam wireless transmissions is prohibited. 47 U.S.C. Section 302a(b). Parties in violation of these provisions may be subject to the penalties set out in 47 U.S.C. Sections 501-510. Fines for a first offense can range as high as $11,000 for each violation or imprisonment for up to one year, and the device used may also be seized and forfeited to the U.S. government.

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
tony18183
 
Posts: 28
Joined: Mon Dec 19, 2011 11:19 pm

WB2010b Sub Part Question

Post by tony18183 »

Hi Guys,

The substitute part of resistor has higher failure rate. Is it okay to use?

And the substitute for LED ?
160-1206-1-ND ------- = 516-1452-1-ND

>These substitute are MCR Series, General Purpose, MCR03 is the package size for both , the Code type for Automotive is EZP and >the Subtitute is ERT

>Differences found in the datasheet under Technical data page 4/6 There is no much differences but you have verify from the >datasheets
RHM49.9HCT-ND ------ = RHM49.9CFCT-ND
RHM10KGCT-ND ----- = RHM10KCGCT-ND
RHM10GCT-ND ------- = RHM10CGCT-ND
RHM22GCT-ND -------- = RHM22CGCT-ND

Locked
Please be positive and constructive with your questions and comments.

Return to “Wave Bubble”