RC1a PCBs on Ebay
Moderators: adafruit_support_bill, adafruit

RC1a PCBs on Ebay

by lightningserpent on Tue May 01, 2012 7:41 am

I wanted to share the fact i found a seller on ebay selling RC1a PCBs. Ebay Item number: 261005875382. The seller was very quick to answer the few questions, seeing if any errors existed from the design file, i had before placing my order.

http://www.ebay.com/itm/261005875382?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_500wt_1204

Solder stencil will be ordered from pololu.com
lightningserpent
 
Posts: 50
Joined: Tue May 01, 2012 7:27 am

Re: RC1a PCBs on Ebay

by lightningserpent on Wed May 02, 2012 10:39 pm

Boards arrived today, They look really good. Each board also has an electronic test stamp on it.
Attachments
457350_403139103041203_100000353511347_1268312_1654350150_o.jpg
457350_403139103041203_100000353511347_1268312_1654350150_o.jpg (233.5 KiB) Viewed 2657 times
lightningserpent
 
Posts: 50
Joined: Tue May 01, 2012 7:27 am

Re: RC1a PCBs on Ebay

by Trez on Thu Sep 06, 2012 9:33 pm

I'm thinking about buying this.

Can you hear me now? Good.
Trez
 
Posts: 2
Joined: Thu Sep 06, 2012 9:12 pm

Re: RC1a PCBs on Ebay

by lightningserpent on Thu Sep 06, 2012 11:56 pm

I was able to successfully build my wavebubble using these boards. You should note that the silkscreen is not correct (this is noted in the errata pages on the WB Wiki). I referenced the eagle files and part layout sheets extensively so it did not matter to me if the silkscreen was off.

This project was by far the most complicated one I have ever done and I dont dare think about what I spent on it by the time I was done. It also happens to be one of my favorite projects and it was very satisfying to build.

Good luck.
lightningserpent
 
Posts: 50
Joined: Tue May 01, 2012 7:27 am