Fuses for RC1a
Moderators: adafruit_support_bill, adafruit

Fuses for RC1a

by avo3 on Sat Jun 02, 2012 1:58 pm

Hello,
Could anyone tell me what are the proper fuses for the atmega88 RC1a wavebubble.
Thank You
avo3
 
Posts: 5
Joined: Mon May 14, 2012 2:11 pm

Re: Fuses for RC1a

by lightningserpent on Tue Jun 19, 2012 12:00 am

As long as it is an ATmega88 and not an 88p (I am sure I saw the p has different fuses) all you have to do is cd to the directory of the firmware you downloaded and type "make burn-fuse". I used the usbtiny for my ISP so I needed to modify the makefile and replace "avrisp" with "usbtiny". After I saved the file I opened a terminal and cd'd into the directory of the firmware and typed "sudo make burn-fuse" (the notes on the usbtiny page tell us we need to sudo). Avr did the rest because the firmware has the fuses loaded. Check out ladyada's picture on the make pages for a screen shot.

http://www.flickr.com/photos/ladyada/332287395/in/photostream/lightbox/
lightningserpent
 
Posts: 50
Joined: Tue May 01, 2012 7:27 am