I used Eagle to rebuild the gerbers from the RC1a files; that fixed the silkscreen issue. I also took the opportunity to make a few small changes (moved some component IDs on the silkscreen to better places; made the LiPoly battery terminals smaller so that the protection board can be directly soldered to them.)
Let me know if you find any errors, because these are what I'm sending off to be made. Enjoy!
http://rapidshare.com/files/60401509/wb ... d.zip.html
(All files are 2.4, no zero suppression.)
-b
fixed wb 1.0b gerbers
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 102
- Joined: Mon Aug 27, 2007 6:49 am
new board design
Hi I tried to open these in Eagle - after extracting - but can't - how should I do it?
rgds
Ian
rgds
Ian
-
- Posts: 63
- Joined: Tue Aug 14, 2007 5:34 am
Re: new board design
Nope, these are the Gerber outputs from Eagle. The Eagle files in the Download section are correct; something went wrong when LadyAda made the Gerber files from them. (I'm guessing that it had to do with making the panel?)inh wrote:Hi I tried to open these in Eagle - after extracting - but can't - how should I do it?
rgds
Ian
If you want to look at the Gerber files, try something like http://www.softwarecompanions.com/gerbview.html
-b
- aqisnotliquid
- Posts: 117
- Joined: Mon Oct 06, 2008 10:46 pm
Re: fixed wb 1.0b gerbers
Well, here's something that people have been looking for...
A Gerber editor!
If you know how Gerber files work, have fun with it. You should be able to merge bushing's gerbers into one panel with this program, but I haven't had time to figure out how yet.
http://www.viewplot.com/
A Gerber editor!
If you know how Gerber files work, have fun with it. You should be able to merge bushing's gerbers into one panel with this program, but I haven't had time to figure out how yet.
http://www.viewplot.com/
-
- Posts: 3
- Joined: Mon Dec 29, 2008 2:11 am
Re: fixed wb 1.0b gerbers
Hi all
Can anyone please upload this in http://www.mediafire.com
I cannot access rapidshare
Thanks in advance
Can anyone please upload this in http://www.mediafire.com
I cannot access rapidshare
Thanks in advance
-
- Posts: 3
- Joined: Fri Dec 26, 2008 7:08 pm
Re: fixed wb 1.0b gerbers
kavin6 wrote:Hi all
Can anyone please upload this in http://www.mediafire.com
I cannot access rapidshare
Thanks in advance
upload at http://www.mediafire.com/?sharekey=7642 ... 2c3397412a
-
- Posts: 3
- Joined: Mon Dec 29, 2008 2:11 am
Re: fixed wb 1.0b gerbers
Thanks a lotMushupork wrote:kavin6 wrote:Hi all
Can anyone please upload this in http://www.mediafire.com
I cannot access rapidshare
Thanks in advance
upload at http://www.mediafire.com/?sharekey=7642 ... 2c3397412a
- amigomaxwell
- Posts: 18
- Joined: Sat Jan 17, 2009 1:10 am
Re: fixed wb 1.0b gerbers
bushing, could you upload the .brd files as well ?
Cheers
Cheers
-
- Posts: 29
- Joined: Wed Feb 13, 2008 5:16 pm
Re: fixed wb 1.0b gerbers
Good luck talking to bushing. He has not been active any more since December 2007.
Please be positive and constructive with your questions and comments.