Can use two 3.7V AA battery?
Moderators: adafruit_support_bill, adafruit

Can use two 3.7V AA battery?

by tony18183 on Thu Apr 19, 2012 9:08 am

Is it okay to use two 3.7V AA battery to replace two 1.5V AA battery?

brighter LED?
tony18183
 
Posts: 28
Joined: Mon Dec 19, 2011 11:19 pm

Re: Can use two 3.7V AA battery?

by adafruit_support_bill on Thu Apr 19, 2012 9:12 am

Two 3.7v cells is way too much voltage. You will burn out the LEDs if you don't fry the processor first.
User avatar
adafruit_support_bill
 
Posts: 31843
Joined: Sat Feb 07, 2009 10:11 am

Re: Can use two 3.7V AA battery?

by tony18183 on Thu Apr 19, 2012 10:29 am

what is the maximum voltage can take without getting the LEDs or processor fry?
tony18183
 
Posts: 28
Joined: Mon Dec 19, 2011 11:19 pm

Re: Can use two 3.7V AA battery?

by adafruit_support_bill on Thu Apr 19, 2012 11:01 am

The processor is 5.5v max. For the LEDs, you need to worry about current. The current going to the leds is controlled partly by the battery voltage and partly be the resistor arrays RN1-RN8. The LEDs are rated for 20mA each.

Details on driving LEDs are here: http://www.ladyada.net/learn/arduino/LEDs.html
User avatar
adafruit_support_bill
 
Posts: 31843
Joined: Sat Feb 07, 2009 10:11 am