Memorial day is 05/25/2015 – Orders will ship out on May 26th. There will not be any deliveries or shipping on Monday. Any order placed after 11am ET on Friday May 22nd will not start to ship out until Tuesday May 26th.

Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini
Moderators: adafruit_support_bill, adafruit

Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini

by tkuper05 on Tue Jan 29, 2013 8:34 pm

Hi

I'm wanting to control the Adafruit 16-Channel 12-bit PWM/Servo Driver with an Arduino Pro Mini 5v/328/16Hz. The tutorial calls for A4 and A5 to be connected to the controller. My Pro Mini only has A0-A3. Can you show my how to do this? I'm not familiar with altering libraries, which is how I assume this can be done.
tkuper05
 
Posts: 4
Joined: Tue Jan 29, 2013 8:30 pm

Re: Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini

by adafruit_support_bill on Wed Jan 30, 2013 7:15 am

You do have an A4 and A5 on the ProMini, they are just not labeled on the silkscreen. They are the two holes above A2 and A3. :D

adafruit_support_bill
 
Posts: 37547
Joined: Sat Feb 07, 2009 10:11 am

Re: Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini

by tkuper05 on Wed Jan 30, 2013 10:20 am

/facepalm

Thanks for pointing the obvious out to me :)
tkuper05
 
Posts: 4
Joined: Tue Jan 29, 2013 8:30 pm