Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini
Moderators: adafruit_support_bill, adafruit

Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini

by tkuper05 on Tue Jan 29, 2013 8:34 pm

Hi

I'm wanting to control the Adafruit 16-Channel 12-bit PWM/Servo Driver with an Arduino Pro Mini 5v/328/16Hz. The tutorial calls for A4 and A5 to be connected to the controller. My Pro Mini only has A0-A3. Can you show my how to do this? I'm not familiar with altering libraries, which is how I assume this can be done.
tkuper05
 
Posts: 4
Joined: Tue Jan 29, 2013 8:30 pm

Re: Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini

by adafruit_support_bill on Wed Jan 30, 2013 7:15 am

You do have an A4 and A5 on the ProMini, they are just not labeled on the silkscreen. They are the two holes above A2 and A3. :D
User avatar
adafruit_support_bill
 
Posts: 31041
Joined: Sat Feb 07, 2009 10:11 am

Re: Adafruit 16-Channel 12-bit PWM/Servo Driver with Pro Mini

by tkuper05 on Wed Jan 30, 2013 10:20 am

/facepalm

Thanks for pointing the obvious out to me :)
tkuper05
 
Posts: 4
Joined: Tue Jan 29, 2013 8:30 pm