I recently purchased a few Li-Ion chargers and am looking for mounting hole sizes and and spacings. I do not yet have the items in hand and I'm 3D printing some mounting brackets. The two items are the
USB LiIon/LiPoly charger - v1.2 PRODUCT ID: 259 &
USB/DC Lithium Polymer battery charger 5-12V - 3.7/4.2v cells
PRODUCT ID: 280
It would be fantastic if this information was included by default in the technical details section
Li-Ion Charger mounting dimensions
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Li-Ion Charger mounting dimensions
the eagle files for PID 280 are here:
https://github.com/adafruit/Adafruit-US ... ly-Charger
I'll see if the PID 259 files are available.
https://github.com/adafruit/Adafruit-US ... ly-Charger
I'll see if the PID 259 files are available.
- adafruit2
- Posts: 22148
- Joined: Fri Mar 11, 2005 7:36 pm
- nclark77
- Posts: 2
- Joined: Fri Dec 19, 2014 1:00 pm
Re: Li-Ion Charger mounting dimensions
Thank you for the info but It still doesn't answer my questions. This requires me to download and install a program on my machine that I would otherwise have no need or use for,followed by interrogating the board layout in order to find these basic dimensions. If its that much of process I'll just wait till I have the boards in hand and take a caliper to them.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Li-Ion Charger mounting dimensions
Those are the only board files we have.
Please be positive and constructive with your questions and comments.