So, if you enter "5", the sketch still prints out "Enrolling ID #0"?
Or does it print out the ID number you enter?
Fingerprint Sensor Problem
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
- Michael_af
- Posts: 1
- Joined: Tue Jan 03, 2017 2:25 pm
Re: Fingerprint Sensor Problem
Hi, same problem here, but if I write for example 4 it prints
"Enrolling ID #4"
but it remember this finger on ID #0, previous fingers were removed from FP sensor. I used the newest library from GH,
can anyone help me?
"Enrolling ID #4"
but it remember this finger on ID #0, previous fingers were removed from FP sensor. I used the newest library from GH,
can anyone help me?
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Fingerprint Sensor Problem
Try Arduino 1.6.9
- vijram
- Posts: 1
- Joined: Thu Mar 02, 2017 12:54 am
Re: Fingerprint Sensor Problem
hi admin, now i am currently working with adafruit finngerprintsensor(R305 V1.6) with arduino ide with adafruit fingerprint sensor library using linux . i got problem while running example program of adafruit fingerprint sensor library, it not getting my input as id, it generate automatically. while i give integer value as id it doesn`t anything and while i give non integer value like alphabet it takes as id #0, #111 and somemore... pls help me to get desired output for arduino example programs of adafruit fingerprint sensor library.... thanks in advance...
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Fingerprint Sensor Problem
In Serial Monitor, make sure you have it set to send CR and NL. There's a dropdown on the bottom of the serial monitor window where you select this.
Please be positive and constructive with your questions and comments.