There is no USPS pickup on Monday Feb 15th, 2016 because of President's Day. USPS orders placed after 11am EST Fri February 12th will go out Tuesday February 16. UPS orders will ship as normal.

no green light
Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.

no green light

by stevematt21 on Mon Dec 17, 2012 7:45 pm

Hello ! i have purchased a kit v2.0 and i built it today, tried to use it on my new mac mini, no green light. I read that it has a problem with usb 3.0 ports, so i tried to use it on my dell laptop no luck...

i tested my solder connections with a ohm meter all connections work just fine
stevematt21
 
Posts: 4
Joined: Mon Dec 17, 2012 7:42 pm

Re: no green light

by adafruit_support_bill on Tue Dec 18, 2012 7:18 am

Post photos of the front & back of the board and we will check the assembly.

adafruit_support_bill
 
Posts: 45746
Joined: Sat Feb 07, 2009 10:11 am

Re: no green light

by stevematt21 on Tue Dec 18, 2012 11:47 am

here it is
Attachments
back.jpg
back.jpg (471.17 KiB) Viewed 2859 times
front.jpg
front.jpg (445.62 KiB) Viewed 2859 times
stevematt21
 
Posts: 4
Joined: Mon Dec 17, 2012 7:42 pm

Re: no green light

by adafruit_support_bill on Tue Dec 18, 2012 12:53 pm

You have many joints that are not completely soldered. Testing them with a meter is not sufficient. Review the soldering guide and re-flow all the joints and add solder as needed.
http://learn.adafruit.com/adafruit-guid ... -soldering
http://learn.adafruit.com/adafruit-guid ... n-problems

adafruit_support_bill
 
Posts: 45746
Joined: Sat Feb 07, 2009 10:11 am

Re: no green light

by stevematt21 on Tue Dec 18, 2012 7:12 pm

success! A found new hardware came up now what do i do?
stevematt21
 
Posts: 4
Joined: Mon Dec 17, 2012 7:42 pm

Re: no green light

by stevematt21 on Tue Dec 18, 2012 8:15 pm

Ok found out how to install it, i put the blank atmega 168 in the audrino uno plug the 6 pin cable to the uno from the usbtiny and burn the bootloader this is the error message i get
Attachments
error.png
error.png (99.09 KiB) Viewed 2717 times
stevematt21
 
Posts: 4
Joined: Mon Dec 17, 2012 7:42 pm

Re: no green light

by adafruit_support_bill on Wed Dec 19, 2012 8:12 am

Post a photo showing all your connections.

adafruit_support_bill
 
Posts: 45746
Joined: Sat Feb 07, 2009 10:11 am

Please be positive and constructive with your questions and comments.