Programming a ATMEGA328 non-p version.
Moderators: adafruit_support_bill, adafruit

Programming a ATMEGA328 non-p version.

by jchiar on Wed Aug 29, 2012 4:15 pm

Hi I am programming a ATMEGA328 NON-p chip with a USBtinyISP. I have had to change the signature so it will program the non-p version of the ATMEGA328P chip.

I dont see a part number in avrdude for the nonP chip.

I use both ATMEGA328 and ATMEGA328P chips and this is a config change when I switch everytime.

Is there a way to add support for the NON-P chip? arvdude -p m328 perhaps?

so to have something like this:
m328p = ATMEGA328P [/opt/local/etc/avrdude.conf:9029]
m328 = ATMEGA328 [/opt/local/etc/avrdude.conf:xxxx]
Posts: 1
Joined: Wed Aug 29, 2012 4:10 pm

Re: Programming a ATMEGA328 non-p version.

by adafruit on Thu Sep 06, 2012 10:35 pm

you should change the avrdude command and what chip it specifies, not the signature file

Posts: 11908
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc