Hi everyone, Just got my Adafruit starter pack and am excited to start learning about the Arduino.. just to bring anyone interested in helping with my problem up to speed...
I followed the windows install instructions with my Duemilanove plugged in and installed the drivers all went well...Yay!. opened the workspace and pointed it to the correct board, and com port... Followed the lesson plan in Ladyada's tutorial "Let there be blink" Loaded the blink sketch from the library... ran verify/compile... and got this below.... As i said in this posts Subject... these are my first tentative steps into this world programmable hardware.. So be kind... but please help i have no idea what is happening!..
Many thanks in advance for your assistance...
M.
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\1' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\1' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\36' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\1' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\1' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\36' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\34' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\36' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\377' in program
C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware\cores\arduino\._pins_arduino.c:1: error: stray '\377' in program
Couldn't determine program size: C:\Documents and Settings\mmcdonald\Desktop\arduino-0016\hardware/tools/avr/bin/avr-size: 'C:\DOCUME~1\MMCDON~1\LOCALS~1\Temp\build9473.tmp\Blink.hex': No such file
Complete newbie... setup problems
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 3
- Joined: Fri Jul 24, 2009 4:34 pm
Re: Complete newbie... setup problems
Gave up on the PC.... installed it on my Mac Book pro... Everything works just fine
-
- Posts: 12151
- Joined: Thu Apr 06, 2006 4:21 pm
Re: Complete newbie... setup problems
try reinstalling arduino. i dunno why but it looks like something was corrupted in in the install (?)
-
- Posts: 3
- Joined: Fri Jul 24, 2009 4:34 pm
Re: Complete newbie... setup problems
Hi Ladyada... thanks for your quick reply I may try re-installing it on the PC at a later date, right now I'm having fun playing around with your lesson plan on my Mac...
- didier
- Posts: 115
- Joined: Mon Nov 17, 2008 6:14 am
Please be positive and constructive with your questions and comments.