Win7 but does not see the UNO. Unknown device shown in list of devices.
Install Wizard did not launch.
I tried another USB cable with same results and pressed the Reset
fail out of the box
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: fail out of the box
Try right-clicking on the 'unknown device' in Device Manager. Select 'Update Driver'.
That should bring up the Hardware Update Wizard. Follow the same instructions as for the "Found New Hardware Wizard" to install the Windows Driver
That should bring up the Hardware Update Wizard. Follow the same instructions as for the "Found New Hardware Wizard" to install the Windows Driver
-
- Posts: 5
- Joined: Fri Feb 01, 2013 1:49 pm
Re: fail out of the box but the computer still has not found it.
we have a flashing yellow and solid green LED.
- adafruit_support_bill
- Posts: 88096
- Joined: Sat Feb 07, 2009 10:11 am
Re: fail out of the box
And can you select it as a COM port in the IDE?
-
- Posts: 101
- Joined: Sat Jul 28, 2012 8:01 am
Re: fail out of the box
This may be some help, from the Arduino website. It's the installation guide
http://arduino.cc/en/Guide/Windows
http://arduino.cc/en/Guide/Windows
Please be positive and constructive with your questions and comments.