Max31855 v2 ferrite bead replacement
Moderators: adafruit_support_bill, adafruit

Max31855 v2 ferrite bead replacement

by bheiss on Mon Jan 21, 2013 8:11 am

I have dammaged what seems to be one of the ferrite beads on the board. (element right of "Red")
With what can I replace the ferrite bead and/or what are the specification of the element, so that I can replace it ?

Schematics that I found on Github seem to be showing Max31855 V1 board ( https://github.com/adafruit/Adafruit-MAX31855-breakout-board) without any beads.

Tx for your advise !

Encl.: v2 board with dammaged ferrite bead ?
Attachments
max31855 v2 dammaged ferrite bead (1280x960).jpg
max31855 v2 dammaged ferrite bead (1280x960).jpg (168.73 KiB) Viewed 773 times
bheiss
 
Posts: 2
Joined: Mon Jan 21, 2013 7:47 am

Re: Max31855 v2 ferrite bead replacement

by adafruit on Mon Jan 21, 2013 11:37 am

you can use any ferrite bead but a piece of wire will suffice as well, there's two beads and a capacitor - the capacitor is the most important part :)
User avatar
adafruit
 
Posts: 11746
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc

Re: Max31855 v2 ferrite bead replacement

by bheiss on Mon Feb 04, 2013 11:07 am

Tx !
Soldering a piece of wire instead of a bead solved my problem !
bheiss
 
Posts: 2
Joined: Mon Jan 21, 2013 7:47 am

Re: Max31855 v2 ferrite bead replacement

by h4wk3y on Thu Jun 05, 2014 4:14 pm

Hello, please, can you write, which ferrite is really used in original - which parameters does it have?

Have the same problem as bheiss...

Thanks!
h4wk3y
 
Posts: 1
Joined: Thu Jun 05, 2014 4:12 pm

Re: Max31855 v2 ferrite bead replacement

by adafruit_support_mike on Sat Jun 07, 2014 12:36 am

I think we're using 300 ohm 0805s right now, but the value isn't specified because it isn't critical, or even important.
User avatar
adafruit_support_mike
 
Posts: 10891
Joined: Thu Feb 11, 2010 2:51 pm