I'm reading mixed information when I search for support on the Arduino Micro and the Adafruit CC3000. Can anyone tell me if the latest libraries and sample code for the CC3000 support the Arduino Micro?
Thanks!
Jay
Arduino Micro support for the CC3000?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Arduino Micro support for the CC3000?
The Micro is supported.
-
- Posts: 124
- Joined: Tue Jul 22, 2008 12:36 pm
Re: Arduino Micro support for the CC3000?
Thank you, I see many tutorials for the Uno and the CC3000, but I can't seem to find any code/wiring examples for the Micro and CC3000. Do you have any links? I am also playing with the CC3000 code samples, but running into issues- the sketches don't seem to be working. I think it's not being wired correctly.
Thanks!
Jay
Thanks!
Jay
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Arduino Micro support for the CC3000?
No tutorials. The CC3000 needs to be wired to the ICSP header on the Micro. Wire chip select to D10, VBAT to D5, and IRQ to D3.
Here's an ICSP header diagram: Pin 1 is marked on the micro with a white dot
Here's an ICSP header diagram: Pin 1 is marked on the micro with a white dot
-
- Posts: 124
- Joined: Tue Jul 22, 2008 12:36 pm
Re: Arduino Micro support for the CC3000?
Perfect! Thank you.
-
- Posts: 124
- Joined: Tue Jul 22, 2008 12:36 pm
Re: Arduino Micro support for the CC3000?
I have wired it as follows:
CC3000:
IRQ->D10 on the Micro
VBEN->D5 on the Micro
CS->D3 on the Micro
MOSI->ICSP4 on the Micro
MISO->ICSP1 on the Micro
CLK-> D13 on the Micro
VIN-> 5V on the Micro
GND-> GND on the Micro
Am I missing something?
Thank you!
CC3000:
IRQ->D10 on the Micro
VBEN->D5 on the Micro
CS->D3 on the Micro
MOSI->ICSP4 on the Micro
MISO->ICSP1 on the Micro
CLK-> D13 on the Micro
VIN-> 5V on the Micro
GND-> GND on the Micro
Am I missing something?
Thank you!
- adafruit_support_rick
- Posts: 35092
- Joined: Tue Mar 15, 2011 11:42 am
Re: Arduino Micro support for the CC3000?
CLK goes to SCK on the ICSP headerjdoscher wrote:CLK-> D13 on the Micro
Please be positive and constructive with your questions and comments.