I am using an Adafruit Data Logging Shield with an Uno R3
I am getting initialization failure when I run the CardInfo sketch. I have changed the pin assignment from 4 to 10 in the code. I have also tried an ethernet shield using the same code with appropriate pin assignment and the sketch works fine. What other trouble shooting can I do to see if I hosed my shield by putting on the stacker headers? (This is my suspicion) I have another Adafruit DS shield in service and it works fine. I really like the onboard RTC which I also need for this project.
Dave
Adafruit Data Logging Shield Not Talking to me
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- loonhaunt
- Posts: 81
- Joined: Sat Nov 16, 2013 1:40 am
- adafruit_support_bill
- Posts: 88136
- Joined: Sat Feb 07, 2009 10:11 am
Re: Adafruit Data Logging Shield Not Talking to me
Post some nice clear photos of the soldering on your headers and we'll see if we can spot any problems.
Please be positive and constructive with your questions and comments.