I purchased an Adafruit EZ-link a few months ago, and am having trouble getting it to pair with any device.
https://www.adafruit.com/product/1588
On my windows 8 computer with Bluetooth 4.0, it shows up in the bluetooth menu.
It then fails to pair on numerous computers and android devices.
I ahve checked the wiring and it is set up exactly how it should be in the schematic.
Is there any way to reset the module to fix this problem?
Bluetooth EZ-Link
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Bluetooth EZ-Link
There's a small pushbutton up by the GND pin.
Press and hold that for five seconds to make the EZ-Link dump any stored information about a current pairing and advertise itself as avaialble for new pairing. Wait until the LED starts blinking quickly.
Press and hold that for five seconds to make the EZ-Link dump any stored information about a current pairing and advertise itself as avaialble for new pairing. Wait until the LED starts blinking quickly.
- nholtom
- Posts: 4
- Joined: Wed Feb 04, 2015 2:21 pm
Re: Bluetooth EZ-Link
I have done this numerous times. It advertises as available to fair but fails to pair with every device I have tried it with.
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Bluetooth EZ-Link
That clarifies things.. thank you.
There's no reflash the module's firmware in the field. How long have you had the EZ-Link?
There's no reflash the module's firmware in the field. How long have you had the EZ-Link?
- nholtom
- Posts: 4
- Joined: Wed Feb 04, 2015 2:21 pm
Re: Bluetooth EZ-Link
We received the unit in November 2014
- nholtom
- Posts: 4
- Joined: Wed Feb 04, 2015 2:21 pm
Re: Bluetooth EZ-Link
Is there any way to get a new module?
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Bluetooth EZ-Link
Sorry for the late reply.
November is outside our standard replacement period, but send a note to [email protected] with a link to this thead and the folks there will work out a deal with you for a replacement.
November is outside our standard replacement period, but send a note to [email protected] with a link to this thead and the folks there will work out a deal with you for a replacement.
Please be positive and constructive with your questions and comments.