I bought through Amazon the NFC/RFID breakout oard from here: http://www.amazon.com/gp/product/B00KKU ... UTF8&psc=1
When I connect to the Arduino Uno, after the Hello! appears, this appears:
Didn't find PN53x board
Please help.
P.D. I have noted that the 1.6v doesn't have that logo. I can't upload the picture because it says it is invaled type of file.
(Didn't find PN53x board) error in breakout
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- inakineitor
- Posts: 5
- Joined: Sat Apr 04, 2015 8:07 pm
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: (Didn't find PN53x board) error in breakout
Upload a photo that is less than 1meg big 800x600 works well and make sure it is a .jpg or .png file. If that does not work you can upload them to a sharing site like photobucket and post the link to them.
- inakineitor
- Posts: 5
- Joined: Sat Apr 04, 2015 8:07 pm
Re: (Didn't find PN53x board) error in breakout
I directly uploaded it to Photobucket. The link is http://s376.photobucket.com/user/inakin ... uino/story
I soldered it fine with no shorts because I checked continuity between the pins with a multimeter.
I soldered it fine with no shorts because I checked continuity between the pins with a multimeter.
Please be positive and constructive with your questions and comments.