I'm looking at using the Touch Wheel Controller for Analog RGB LED Strips to control LEDs for ambient lighting in a vehicle. If I wire this controller's power leads into the auto's lighting switch, with this controller have a power on memory? Or once the power is disconnected from the controller, will the controller need to be manually turned on every time power is reapplied? Admin, please move this post if it's in the wrong section.
Tom
Touch Wheel Controller Question
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- lcstyle
- Posts: 76
- Joined: Sun Oct 26, 2008 10:55 am
Re: Touch Wheel Controller Question
The answer is found right in the item description.
https://www.adafruit.com/product/1005
https://www.adafruit.com/product/1005
The controller remembers what the last setting is/was when power is lost.
- tomsza
- Posts: 2
- Joined: Thu Nov 05, 2015 9:07 am
Re: Touch Wheel Controller Question
I overlooked that, didn't I. :/lcstyle wrote:The answer is found right in the item description.
https://www.adafruit.com/product/1005
The controller remembers what the last setting is/was when power is lost.
Thanks. This looks like a great controller for my project.
Please be positive and constructive with your questions and comments.