Hi I would like to make the TV-B-Gone, but I did not understand what led ir should be used, you may indicarmeli?
Thanks in advance
Best Regards
What Leds IR should be used?
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: What Leds IR should be used?
Links for all parts are here: http://www.ladyada.net/make/tvbgone/parts.html
-
- Posts: 4
- Joined: Tue Sep 25, 2012 5:16 am
Re: What Leds IR should be used?
adafruit_support wrote:Links for all parts are here: http://www.ladyada.net/make/tvbgone/parts.html
Unfortunately I can not find these IR LEDs, you can suggest some equivalent?
thanks again
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: What Leds IR should be used?
Click on the "Mouser" link to go to the Mouser catalog page. Mouser has both of these in stock. Mouser also has a "Show Similar" button at the bottom of the part specification table. This will show you a list of similar LEDs.
-
- Posts: 4
- Joined: Tue Sep 25, 2012 5:16 am
Re: What Leds IR should be used?
I live in Italy, the shipping to my country is 20 euro, a huge cost, the components are cheap and I thought to find them in other shop ...adafruit_support wrote:Click on the "Mouser" link to go to the Mouser catalog page. Mouser has both of these in stock. Mouser also has a "Show Similar" button at the bottom of the part specification table. This will show you a list of similar LEDs.
thanks again
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: What Leds IR should be used?
We are not familiar with suppliers in your country. We can only suggest parts.
If you use the Mouser "Show Similar" to find similar parts, you can search for those parts at your local supplier.
If you use the Mouser "Show Similar" to find similar parts, you can search for those parts at your local supplier.
Please be positive and constructive with your questions and comments.