LEDs are HOT

Get help and show off your TV-B-Gone kit!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

LEDs are HOT

Post by bmxordie21 »

i did the test and the green light worked. once i finished and i put the batteries in the green light didnt work and the LEDs are HOT!!!! i checked nothing is shorted out that i can see. i actually had the wires break from the battery pack. i searched on line and figured out how to fix it. i have a new battery back on there and still same thing happening the LEDs are hot. i can see one LED working thru a camcorder but only one and their all HOT! i got this kit today i paid to get it over night and it cost me 50 bucks. i wanted to use it today and now im stuck. ANY IDEAS!!!!????? thanks, james

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: LEDs are HOT

Post by adafruit_support_bill »

Post photos of the front and back of the board so we can check your assembly.

bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

Re: LEDs are HOT

Post by bmxordie21 »

I didn't mean to repost but I'll try to take pics

How do you post pics

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: LEDs are HOT

Post by adafruit_support_bill »

Use the "upload attachment" tab below the message editing window. Re-size your photos to about 800x600 if possible.

bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

Re: LEDs are HOT

Post by bmxordie21 »

the wires for the batterys were on and then i was having problems then they broke off
Attachments
IMG_7694-1.jpg
IMG_7694-1.jpg (300.7 KiB) Viewed 4332 times

bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

Re: LEDs are HOT

Post by bmxordie21 »

my soldering isnt the best but its my first project
Attachments
IMG_9361.jpg
IMG_9361.jpg (285.55 KiB) Viewed 4331 times

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: LEDs are HOT

Post by adafruit_support_bill »

There are a couple solder joints that look a little suspicious, but nothing that would account for the LEDs heating up. Check the markings on the transistors. Q5 should be different than Q1-4.

bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

Re: LEDs are HOT

Post by bmxordie21 »

I used a magnifying glass and none of the solders are touching each other and I check the Q5 is in the right spot

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: LEDs are HOT

Post by adafruit_support_bill »

Are all the LEDs getting warm? Or only the one that lights up? Is anything else on the board getting hot?

I don't see any short circuits. But you have several solder joints where the solder has not flowed well onto both the pin and the solder pad. Check this guide for common soldering problems and how to fix them. http://learn.adafruit.com/adafruit-guid ... n-problems

bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

Re: LEDs are HOT

Post by bmxordie21 »

I fixed a lot of my solder points but still all the LEDs and the four NPN transistors are heating Up

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: LEDs are HOT

Post by adafruit_support_bill »

What were you using to power this? The NPN transistors and diodes connect directly between VCC and GND. Even a short circuit on the board could not cause them to overheat with the supplied battery pack. The only way to cause these to overheat is to put more than 5v through it. This will damage the board.

Image

bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

Re: LEDs are HOT

Post by bmxordie21 »

My wire broke off and I searched thru other peoples issues and adafruit support said to scratch off the green part next to the holes and solder on the copper neutral on the front and positive on the back and I used two AA battery pack

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: LEDs are HOT

Post by adafruit_support_bill »

Do you have a multimeter? If so, measure the current from your battery pack when powering the TV-B-Gone.
http://learn.adafruit.com/multimeters/current

bmxordie21
 
Posts: 9
Joined: Thu Jan 10, 2013 6:00 pm

Re: LEDs are HOT

Post by bmxordie21 »

What should it be?

User avatar
adafruit_support_bill
 
Posts: 88087
Joined: Sat Feb 07, 2009 10:11 am

Re: LEDs are HOT

Post by adafruit_support_bill »

I haven't measured one, but from the circuit design I'd estimate around 200mA.

Locked
Please be positive and constructive with your questions and comments.

Return to “TV-B-Gone Kit”