Hi everyone, this is my first post here,
I was looking at the work made by other contributors last week and it inspired me to get a Kit and try it myself.
I would like to share my case that I completed for the TV B Gone.
the LEDs conveniently lay where the sd card slot was and the on/off switch is the same size as the Tripod slot, the indicator light is used by the 'working' green LED The Shutter button activates the TV B Gone..
The Screen, Lens and the flash were glued back in, the 2xAAA battery chamber is now used by the TVBG.
As the case would not fold nicely over to close I cut a slit for the on off switch, this then gave me the idea to cut a long slot across for the LEDs, as the unit automatically starts the first cycle on switching on, the shutter only re-starts, you can operate TVBG without removing the camera from it's case.
I cut the PCB so I could retain the battery and the shutter switch, but allow me room to include the TVBG.
Here is the Wiring, I bent the green LED flat so it would shine through the flash ready lens in the front of the camera, I tacked the wires from the tac-switch the the shutter button.
I have posted these pictures from post image as the originals from myblog are too bog for here, but please feel free to visit and view them. :)