C/C++ classes for LSM9DSO, Motor/Stepper/Servo v2 and 16-Cha

For Adafruit customers who seek help with microcontrollers

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
jmozzi
 
Posts: 8
Joined: Mon Nov 24, 2014 5:38 am

C/C++ classes for LSM9DSO, Motor/Stepper/Servo v2 and 16-Cha

Post by jmozzi »

HELP! HELP! HELP!

Does anyone have Beaglebone Black I2C - C/C++ classes (no python or Arduino bits please) specifically for using the LSM9DSO, Motor/Stepper/Servo v2 and 16-Channel 12-bit PWM/Servo Shields? I'm not after the generic read write functions, more the functions to provide the actual high level readings/configuration like gyro, accelerometer, motor control, etc...

It's so frustrating that Adafruit doesn't do more to provide libraries for anything other than for python/Arduino.
Adafruit... if you are reading this... We love your products but we shouldn't have to read through 60+ pages of a datasheet to work it all out if we're using pure C/C++ and I2C!!!

Any help welcome...

Thanks,
JMozzi...

User avatar
adafruit_support_bill
 
Posts: 88097
Joined: Sat Feb 07, 2009 10:11 am

Re: C/C++ classes for LSM9DSO, Motor/Stepper/Servo v2 and 16

Post by adafruit_support_bill »

Please don't double post. Continue this discussion here: http://forums.adafruit.com/viewtopic.php?f=49&t=63864

Locked
Please be positive and constructive with your questions and comments.

Return to “Microcontrollers”