USB Boarduino
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Wheeljam
- Posts: 9
- Joined: Tue Oct 07, 2014 10:11 pm
USB Boarduino
I purchased a USB Boarduino, but I am unable to load any sketches on it. Not even the sample blink one. I keep getting "avrdude: stk500_getsync(): not in sync: resp=0x00". Also only the red LED is on.
- Attachments
-
- 12-3D7A74EC-809921-960.jpg (68.86 KiB) Viewed 503 times
-
- 11-E39F0A8D-936747-960.jpg (11.99 KiB) Viewed 503 times
- adafruit_support_mike
- Posts: 67454
- Joined: Thu Feb 11, 2010 2:51 pm
Re: USB Boarduino
Double-check the Tools->Serial Port menu to make sure you have the right device or COM port selected.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: USB Boarduino
And what board-type do you have selected? It should be Duemilanove w/ Atmega328.
- Wheeljam
- Posts: 9
- Joined: Tue Oct 07, 2014 10:11 pm
Re: USB Boarduino
Yes that is what it is set at
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: USB Boarduino
Is there any LED activity at all on power-up or when you press the reset button?
- Wheeljam
- Posts: 9
- Joined: Tue Oct 07, 2014 10:11 pm
Re: USB Boarduino
There is brief LED activity on the TX and RX LED's. None on the green LED.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: USB Boarduino
It sounds like you may be missing a bootloader. Please contact [email protected] with a link to this thread and request a replacement Boarduino processor chip.
- Wheeljam
- Posts: 9
- Joined: Tue Oct 07, 2014 10:11 pm
Re: USB Boarduino
WOW, not many businesses these days have customer support or service on Sundays. As an over the road truck driver, away from home weeks at a time, I appreciate that. Thanks guys
- Wheeljam
- Posts: 9
- Joined: Tue Oct 07, 2014 10:11 pm
Re: USB Boarduino
Well I got home and the replacement chip was waiting for me. I finally got a chance to play with it today. IT WORKS, IT WORKS!!!!!!!!! Thank you for the help and fast replacement. You guys are great.
Please be positive and constructive with your questions and comments.