One is working fine with my Flora V2, the second flora has been giving me problems.
In December when trying to prototype out my project the second flora’s D7 LED started blinking oddly and now the board won’t be recognized by the computer.
Project #1 and its flora works fine. I’ll try the usb cord on project #1 and the proper port will show up.
Project #2 - (Same USB) Initially it sees the new flora, when I go to upload it disappears out of the port.
Then sends this error.
Arduino: 1.6.6 (Mac OS X), Board: "Adafruit Flora"
Sketch uses 7,110 bytes (24%) of program storage space. Maximum is 28,672 bytes.
Global variables use 179 bytes of dynamic memory.
Couldn't find a Board on the selected port. Check that you have the correct port selected. If it is correct, try pressing the board's reset button after initiating the upload.
This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Hitting reset right after uploading hasn’t helped it come up.
I was able to get it to connect one and I got this error message.
avrdude: ser_recv(): read error: Device not configured