Compatibility shield
Moderators: adafruit_support_bill, adafruit

Compatibility shield

by drikdrik on Sun Jan 06, 2013 4:25 pm

I wonder if I can send the GPS data on the sd card of ethernet shield from the GPS module, all to create a web server with the sd card of ethernet shield, as I can view the GPS data on LCD displays or on internet site

How to this?

Here the list of shields I think buy:
http://www.adafruit.com/products/191
http://www.adafruit.com/products/201
http://www.adafruit.com/products/99
http://www.alpha-crucis.com/fr/modules- ... 07108.html
https://www.sparkfun.com/products/256

Ps:I already work with Arduino

Sorry for my bad english, I am french :lol:

I hope your fine forum can help me for this project
drikdrik
 
Posts: 3
Joined: Sun Jan 06, 2013 3:56 pm

Re: Compatibility shield

by adafruit_support_bill on Mon Jan 07, 2013 6:10 am

Yes, that combination of components should work.
User avatar
adafruit_support_bill
 
Posts: 31071
Joined: Sat Feb 07, 2009 10:11 am

Re: Compatibility shield

by drikdrik on Mon Jan 07, 2013 1:41 pm

thank you very much,
But how send datas GPS to the SD card of shield ethernet
drikdrik
 
Posts: 3
Joined: Sun Jan 06, 2013 3:56 pm

Re: Compatibility shield

by adafruit_support_bill on Mon Jan 07, 2013 1:58 pm

The gps tutorial shows how to log to SD. You may need to change the SPI CS pin in the code to match the CS pin for the SD on the Arduino Ethernet.

http://learn.adafruit.com/adafruit-ultimate-gps
User avatar
adafruit_support_bill
 
Posts: 31071
Joined: Sat Feb 07, 2009 10:11 am

Re: Compatibility shield

by drikdrik on Mon Jan 07, 2013 2:05 pm

Thank you, I begin to understand
I would if I need help

Good day
drikdrik
 
Posts: 3
Joined: Sun Jan 06, 2013 3:56 pm