I am attempting to program a new Flora, from a Mac running 10.10.5
When I load the IDE (version 1.6.5) I don't get any .tty ports to select. I have messed with FTDI drivers etc and no change.
I have also tested 3 different cables to ensure that was not the problem.
Any suggestions?
Flora and Mac 10.10 not working
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Flora and Mac 10.10 not working
Connect the Flora to the Mac, open System Information, and go to the USB tab. Do you see an item in the hadware list for the Flora?
- rgrannan
- Posts: 1
- Joined: Wed Oct 07, 2015 10:12 pm
Re: Flora and Mac 10.10 not working
I'm having the same problem -- did you have any luck?
- adafruit_support_mike
- Posts: 67446
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Flora and Mac 10.10 not working
Same instructions: do you see the Flora being recognized at the hardware level in System Information?
Please be positive and constructive with your questions and comments.