ALL GONE **** Rare Parts Kit for the TR909 Clone '9090' ****

Trading post for x0xen, x0x parts, axles, pelts and tobacco

Moderators: altitude, adafruit_support_bill, adafruit, phono, hamburgers

Please be positive and constructive with your questions and comments.
Gaetano
 
Posts: 158
Joined: Tue Dec 18, 2007 2:15 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by Gaetano »

Hi people,

Just an update, I have the kit together as specified, I had to change it to $95 including postage to anywhere. The only exception to this is France, as I have had some stuff sent back to me from there, it is not returned however in a registered satchel, so people in France (or anyone else, if they like), can get it sent registered for $15 more.

I will now be contacting the people by email / PM who posted or PMed me in the order I was contacted in. If I miss out on someone let me know, or if you want to go on the waiting list, as I'm trying to get some more kits together as I have spares of some of the components.

The kit contains the following:
95 x 1SS133(T-77) - Rohm Diodes.
04 x 2SA798-(G) - Mitsubishi Dual PNP Common Emmitter Transistors.
22 x 2SA1115-(F) - PNP Transistors.
57 x 2SC2603-(F) - NPN Transistors.
02 x 2SC2878-(A) - Toshiba NPN High Reverse Current Gain Transistors.
02 x 2SD1469-(R) - Rohm Medium Power NPN Transistors.
01 x CA3080E - OTA
02 x CD4006 - 18 Bit Static Shift Register
03 x CD4011U - Quad 2-Input NAND - (U => UNBUFFERED)
03 x CD4013 - Dual D-type Flip Flop
03 x CD4040 - 12 State Binary Counter
02 x CD4051 - 8 Bit Data Selector (Single 8-ch. Multiplexer/Demultiplexer)
04 x CD4069U - Hex Inverters - (U => UNBUFFERED)
01 x CD4070 - Quad Exclusive OR
02 x CD4520 - Dual Binary Counter
06 x CD40174 - HEX D Flip Flop
01 x CA339E - Quad Comparator.

I would also strongly suggest consulting Kevin's (Subatomicglue's) 9090 worklog, as he has done a fantastic job documenting the construction of the 9090, describing it in detail step by step. He also shows how to mount some of these components, e.g., the 2SA1115 and the 2SC2603 correctly, and where to use the 2SA798's.

http://www.subatomicglue.com/9090l0g/

Gaetano
 
Posts: 158
Joined: Tue Dec 18, 2007 2:15 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by Gaetano »

I have contacted a couple people on here, who wanted one of these, but not had a reply. If you have changed your mind and don't want or need one, just let me know as these are running out. I don't want to have contacted you and then not have any left.

User avatar
paradigm x
 
Posts: 237
Joined: Sun Feb 07, 2010 3:49 pm

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by paradigm x »

id love to build one of these but it all looks so complicated, im a total noob at all this. :(

Im going to get a couple of really basic kits to practice with and see how it goes.

Gaetano
 
Posts: 158
Joined: Tue Dec 18, 2007 2:15 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by Gaetano »

Paradigm X wrote:id love to build one of these but it all looks so complicated, im a total noob at all this. :(

Im going to get a couple of really basic kits to practice with and see how it goes.
That's a good way to go, Adafruit has some other good stuff to practice building on. The end result is well worth the effort, and these make a perfect match for one or more x0xen :)

User avatar
dingebre
 
Posts: 21
Joined: Sun Jul 26, 2009 2:49 pm

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by dingebre »

Thanks Gaetano! My 2 kits came today and as always, excellent packaging and just as described and promised.

David

danyool001
 
Posts: 59
Joined: Tue Jan 08, 2008 10:50 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by danyool001 »

Thanks gary, parts arrived... Cheers

User avatar
rosch
 
Posts: 16
Joined: Sun Nov 08, 2009 3:07 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by rosch »

thank you Gaetano!
very fast, great service - just like the x0xb0x rare parts i bought from you last time!
thanks!

User avatar
aminoacid
 
Posts: 352
Joined: Tue Jun 20, 2006 5:27 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by aminoacid »

iwould love building a 909 clone - but i rather make one with an intergrated step sequenser.

anybody know of any project that made the 9090 with a sequenser?

anybody know of a sequenser project that could be used together with the 9090?

if this is possible id be up for a rare parts kit!

Gaetano
 
Posts: 158
Joined: Tue Dec 18, 2007 2:15 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by Gaetano »

Hi people,

I have just finished moving house and getting my phone and net connected finally :roll:. While I was waiting, I got a few more 'Rare' parts for the incomplete 9090 kits I had left over, and I also did a group buy for some more x0xb0x parts, so I have some of these also. If someone wants a 9090 kit, now is the time to grab one as they will be the last ones I put together :!: .

drtitus
 
Posts: 6
Joined: Mon Dec 14, 2009 3:10 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by drtitus »

Hey Gaetano,

Do you still have these parts up for grabs?

I should really finish my x0xb0x first, but I've caught the DIY audio bug :)

Gaetano
 
Posts: 158
Joined: Tue Dec 18, 2007 2:15 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by Gaetano »

Hi yes,

I still have some, but one got lost and cost me $95, so I am only sending them via a registered prepaid satchel (+$15 extra, I actually offered this to everyone and most accepted it the first time I sent them out), i.e., $110 total, the good news is that you can fit at least 2 of these in it for the same price (or a x0x kit or 3!).

Just for reference:

1 Kit = $110
2 kits = $205

Gaetano
 
Posts: 158
Joined: Tue Dec 18, 2007 2:15 am

Re: ** Rare Parts Kit for the TR909 Clone '9090' - $95 **

Post by Gaetano »

Hi People I am in the process of getting a quote for some panels for the 9090 front and rear.

The rear will probably be Black with white writing, drilled and punched.

The front will probably be raw Aluminium drilled and engraved with black in the engraved lettering.

They will be designed for this easily available IEC Plug / Fuse / Switch combo (if I can I will probably send one with the panels).

http://www.jaycar.com.au/productView.as ... rm=KEYWORD

The panels will fit this case:

http://www.jaycar.com.au/productView.as ... rm=KEYWORD

The case is a Cheval PF-19 2UDBLK:

http://www.chevalgrp.com/pf_19.php

It would be easy to use these panels on a wooden case, so you don't need to purchase the actual PF-19 Case (I won't be supplying these as the postage would be insane due to their weight!).

If you are interested in a set of panels, PM me on the Adafruit forum here.

or post on the introspectiv forum: http://uk.groups.yahoo.com/group/introspectiv/

, and when I get a price I will contact the ones who want one, and let them know how much. I have not been quoted yet.

User avatar
aminoacid
 
Posts: 352
Joined: Tue Jun 20, 2006 5:27 am

Re: **** Panels & Rare Parts Kit for the TR909 Clone '9090' ****

Post by aminoacid »

hope thoose kits wont run out in the near future!

i d love a kit, but i am unemployd untill spring except for some assembling for friends...

could you give me poke if your running out of components?

Gaetano
 
Posts: 158
Joined: Tue Dec 18, 2007 2:15 am

Re: **** Panels & Rare Parts Kit for the TR909 Clone '9090' ****

Post by Gaetano »

A preliminary price for the panel Sets is $230 US for the Pair of Panels for the 9090 , but only if people want 8 more sets, as I will probably only do 10 sets as they don't get much cheaper for doing even 50 sets plus, as the setup fees are so very high. If this goes okay, I'll probably do some more panels that I want for other projects. I don't want any money up front, just PM me if you are interested, and when I get the final quote, I'll let people know first come first served, as I said only 8 on offer as I will be using 2 for myself.

Amanita
 
Posts: 19
Joined: Tue Feb 17, 2009 6:33 am

Re: **** Panels & Rare Parts Kit for the TR909 Clone '9090' ****

Post by Amanita »

Hey Gaetano - i'm trying to respond to our recent PMs but the messages just sit in the outbox - not sure why this is but...... Anyway i deffinately want to get a kit. Could you try to PM me a new message and i'll try to relpy with my paypal info?

Cheers


A

Locked
Please be positive and constructive with your questions and comments.

Return to “x0x shop”