Wrong wall-wart, now what?
Moderators: adafruit_support_bill, adafruit

Wrong wall-wart, now what?

by SpeexVocon on Fri Jan 21, 2011 2:44 am

I built my ybox2 and plugged it in to the wall with an adapter that had the recommend voltage and amperage. But out of simple carelessness, I accidentally used an adapter with A/C output. So now the propeller chip isn't recognized when I try to program it. Do you have any recommendations on what I should replace?? (i.e. the prop, eeprom, enc chip?)
SpeexVocon
 
Posts: 1
Joined: Fri Jan 21, 2011 2:38 am

Re: Wrong wall-wart, now what?

by adafruit on Tue Mar 08, 2011 12:42 pm

A/C shouldnt have damaged it since there's a diode in series, do you have a photo of the kit?
User avatar
adafruit
 
Posts: 11705
Joined: Thu Apr 06, 2006 4:21 pm
Location: nyc