Which Shields SAFE for DUE?
Moderators: adafruit_support_bill, adafruit

Which Shields SAFE for DUE?

by sellensr on Sat Dec 29, 2012 11:04 am

The DUE supplies 5V on the usual header pin, but will only tolerate 3.3V levels coming back from a shield.

Is there a tidy table somewhere of shield characteristics, showing which pins they use and what levels they drive them at? Or even which boards they are hardware and software compatible with?

I don't want to fry my DUE by accidentally plugging in a shield that returns too high a voltage. I solved part of the problem by looking closely at the one shield I wanted to use immediately


and I'm hoping to benefit from somebody else's efforts with the others.

Posts: 14
Joined: Tue Nov 06, 2012 9:41 pm

Re: Which Shields SAFE for DUE?

by adafruit_support_bill on Sat Dec 29, 2012 1:20 pm

The closest thing to what you are looking for is http://shieldlist.org
They catalog pin utilization for a large number shields. Since this list was compiled for the 'classic' Arduino, you can probably assume that most digital pins configured for input will be 5v.

Posts: 37686
Joined: Sat Feb 07, 2009 10:11 am