PN532 Breakout Board V1.3 Schematic

Adafruit Ethernet, Motor, Proto, Wave, Datalogger, GPS Shields - etc!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
palhinhaa
 
Posts: 2
Joined: Mon Mar 03, 2014 12:07 pm

PN532 Breakout Board V1.3 Schematic

Post by palhinhaa »

Hello,

I bought the PN532 Breakout Board V1.3 but there is only a schematic for v1.0, can you provide me the schematic for v1.3.

Thank you

adafruit
 
Posts: 12151
Joined: Thu Apr 06, 2006 4:21 pm

Re: PN532 Breakout Board V1.3 Schematic

Post by adafruit »

Hi, they're actually the same :)

palhinhaa
 
Posts: 2
Joined: Mon Mar 03, 2014 12:07 pm

Re: PN532 Breakout Board V1.3 Schematic

Post by palhinhaa »

But seems to have a regulator and a 5V pin that is not in the schematic, or Im wrong?

Thank you

jpwright
 
Posts: 2
Joined: Tue Jun 05, 2012 3:07 am

Re: PN532 Breakout Board V1.3 Schematic

Post by jpwright »

It seems like the only schematic that exists is for the breakout board version, as opposed to the Arduino shield version. Could you include a schematic for the shield version somewhere?

I assume they are very similar, but there appear to be some minor differences (e.g. the shield seems to have solder jumpers & pullups for SEL0 and SEL1 which are not made clear in the current schematic)

User avatar
ckcamp95
 
Posts: 1
Joined: Wed Jul 29, 2015 12:29 pm

Re: PN532 Breakout Board V1.3 Schematic

Post by ckcamp95 »

Hello,

Similar to the original question, I purchased the PN532 Breakout Board V1.6 but there is only a schematic for v1.3, are they the same as well?

Thanks

User avatar
adafruit2
 
Posts: 22148
Joined: Fri Mar 11, 2005 7:36 pm

Re: PN532 Breakout Board V1.3 Schematic

Post by adafruit2 »


Locked
Please be positive and constructive with your questions and comments.

Return to “Arduino Shields from Adafruit”