Trouble with VS1053 simple test >~<

Adafruit Ethernet, Motor, Proto, Wave, Datalogger, GPS Shields - etc!

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
kain leo
 
Posts: 5
Joined: Sun Feb 03, 2013 4:35 pm

Trouble with VS1053 simple test >~<

Post by kain leo »

Hi,

I was used the VS1053 breakoutboard and a Auduino Uno to test the Simple Audio Player. I exactly followed the tutorial and soldered all the pins on the board.
https://learn.adafruit.com/adafruit-vs1 ... yer-wiring


when I run the code, it shown the VS1053 found, and Playing Track 001 ... and Done Playing. However it didn't play any music which I putted in the SD card. All my connection is correct, so I thought it probably because of the SD card. After I changed a new, good one, it's still the same.

Does anyone has any idea about this?

Thanks! >~<

User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: Trouble with VS1053 simple test >~<

Post by adafruit_support_bill »

Please post photos showing all your soldering and connections to the board.

If it says it was playing track 001, then it must have found the card and the file on it. The problem is most likely on the output side.

User avatar
kain leo
 
Posts: 5
Joined: Sun Feb 03, 2013 4:35 pm

Re: Trouble with VS1053 simple test >~<

Post by kain leo »

Hi thanks so much!! It turned out I connected to a wrong pin number. >~<

I got another problem. I'm testing the Ogg Recorder now. It says "SD failed, or not present". Do you know what's wrong with this?

Actually, I'm not sure about the electronic circuit connection, could you please to help me to check if it's correct? (attached images)

Thanks vary vary much! >~<
Attachments
1.png
1.png (569.95 KiB) Viewed 232 times

User avatar
kain leo
 
Posts: 5
Joined: Sun Feb 03, 2013 4:35 pm

Re: Trouble with VS1053 simple test >~<

Post by kain leo »

2
Attachments
2.png
2.png (878.75 KiB) Viewed 232 times
3.png
3.png (670.57 KiB) Viewed 232 times

User avatar
kain leo
 
Posts: 5
Joined: Sun Feb 03, 2013 4:35 pm

Re: Trouble with VS1053 simple test >~<

Post by kain leo »

3
Attachments
4.png
4.png (692.63 KiB) Viewed 232 times

User avatar
adafruit_support_bill
 
Posts: 88093
Joined: Sat Feb 07, 2009 10:11 am

Re: Trouble with VS1053 simple test >~<

Post by adafruit_support_bill »

I got another problem. I'm testing the Ogg Recorder now. It says "SD failed, or not present".
Is the playback still working? You were able to access the SD card before. Double check that your connections to that are still OK. You may have knocked something loose when wiring up the mic.

Locked
Please be positive and constructive with your questions and comments.

Return to “Arduino Shields from Adafruit”