Is this device labeling correct for an Arduino Due?
Is the pin layout for the Due identical to any other Arduino models?
Thanks
http://www.adafruit.com/products/196
Shield Compatibility: Proto-Screwshield (Wingshield) R3
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- gatorback
- Posts: 1
- Joined: Tue Apr 21, 2015 6:27 pm
- adafruit_support_mike
- Posts: 67485
- Joined: Thu Feb 11, 2010 2:51 pm
Re: Shield Compatibility: Proto-Screwshield (Wingshield) R3
The Due's headers match the Arduino Uno's for digital pins 0-13, analog pins 0-5, and the power header.
The Due has other pins that the Proto-Screwshield doesn't reach, but the basic Uno header layout is common to Arduinos large enough to accept a shield.
One thing to note: the pin functions only agree for the basic 'digital input/output' pin behavior. Things like hardware SPI and I2C can be on different pins for different models.
The Due has other pins that the Proto-Screwshield doesn't reach, but the basic Uno header layout is common to Arduinos large enough to accept a shield.
One thing to note: the pin functions only agree for the basic 'digital input/output' pin behavior. Things like hardware SPI and I2C can be on different pins for different models.
Please be positive and constructive with your questions and comments.