I am using the xbee adaptor
on a breadboard. and jumping wires.
the most extrange thing happens: if I am close to the xbee works, fi I walk away stop working.
and sometimes is vice-versa, another problem is if I lift the usb adaptor ( all the prject is on piece of wood) the xbee stop sending data.
any clue why this is happenig or how to fix it.
Xbee Adaptor Weird, Motion Problem
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- Franklin97355
- Posts: 23910
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Xbee Adaptor Weird, Motion Problem
Sounds like a loose connection somewhere. Try moving everything to a new spot on the breadboard.
- balam
- Posts: 59
- Joined: Thu Jul 30, 2009 10:34 am
Re: Xbee Adaptor Weird, Motion Problem
thanks for the reply,
I move to a new spot, the problem persists.
I move to a new spot, the problem persists.
- Franklin97355
- Posts: 23910
- Joined: Mon Apr 21, 2008 2:33 pm
Re: Xbee Adaptor Weird, Motion Problem
Post some large clear pictures of your circuit and a schematic.
- balam
- Posts: 59
- Joined: Thu Jul 30, 2009 10:34 am
Re: Xbee Adaptor Weird, Motion Problem
thanks for this help.
I actually soldered the tx rx pwr anb ground pins to wires.
the problem persist.
is very weird....
pic attach
I actually soldered the tx rx pwr anb ground pins to wires.
the problem persist.
is very weird....
pic attach
- balam
- Posts: 59
- Joined: Thu Jul 30, 2009 10:34 am
Re: Xbee Adaptor Weird, Motion Problem
picture of xbee and arduino lilypad, bat, and lilypowr
- Attachments
-
- xbee.jpg (252.38 KiB) Viewed 1400 times
- balam
- Posts: 59
- Joined: Thu Jul 30, 2009 10:34 am
Re: Xbee Adaptor Weird, Motion Problem
it so so weird.
I have tryed several fixes and same problem
I have tryed several fixes and same problem
- balam
- Posts: 59
- Joined: Thu Jul 30, 2009 10:34 am
Re: Xbee Adaptor Weird, Motion Problem
any suggestions ?
- balam
- Posts: 59
- Joined: Thu Jul 30, 2009 10:34 am
Re: Xbee Adaptor Weird, Motion Problem -- SOLVE---
sorry, was my fault.
I totally forgot that I had the lilypad code for flex sensor, and after serverl hrs of trbloshutting and moving wires around. I just remembered that the chip had code for sensor . totally forgot about that,
originaly my lilypad had just a plain serial print.
no sensor.
I re upload the original serial print line and now works.
sorry, I had a great lesson.
"keep track of things"
thanks for your help.
I totally forgot that I had the lilypad code for flex sensor, and after serverl hrs of trbloshutting and moving wires around. I just remembered that the chip had code for sensor . totally forgot about that,
originaly my lilypad had just a plain serial print.
no sensor.
I re upload the original serial print line and now works.
sorry, I had a great lesson.
"keep track of things"
thanks for your help.
Please be positive and constructive with your questions and comments.