Continuity in Adaptor Board

XBee projects like the adapter, xBee tutorials, tweetawatt/wattcher, etc. from Adafruit

Moderators: adafruit_support_bill, adafruit

Please be positive and constructive with your questions and comments.
Locked
User avatar
dcolemans
 
Posts: 5
Joined: Tue Dec 03, 2013 9:10 pm

Continuity in Adaptor Board

Post by dcolemans »

Going nuts here trying to put together a tweet-a-watt. Continuity test on the adaptor board shows NO continuity between RTS at the cable header and RTS at the lug for the XBEE. I saw the topic talking about solder joints but mine was pretty well soldered and then resoldered with no joy. Is it remotely possible thre could be a flaw? Meanwhile I'll order a replacement board.

User avatar
adafruit_support_rick
 
Posts: 35092
Joined: Tue Mar 15, 2011 11:42 am

Re: Continuity in Adaptor Board

Post by adafruit_support_rick »

Post some pictures of your soldering

Locked
Please be positive and constructive with your questions and comments.

Return to “XBee products (discontinued)”