I'm using XTCU and two XBEE radios connected to two separate USB ports on my PC to try and get tx and rx fun going.
It appears that one XBEE is transmitting, but no receive on the other end.
Hmmmmm.....
I should mention that I'm using a Spark Fun break out board for one hookup and the adafruit dock/USB board for the other.
Thanks,
Ken
XBEE 1 isnt talking to XBEE2
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
- adafruit_support_bill
- Posts: 88093
- Joined: Sat Feb 07, 2009 10:11 am
Re: XBEE 1 isnt talking to XBEE2
Does it make a difference if you swap the 2 XBees?
- kennymac64
- Posts: 5
- Joined: Wed Mar 18, 2015 12:59 am
Re: XBEE 1 isnt talking to XBEE2
Nope, tried that...
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: XBEE 1 isnt talking to XBEE2
Which version xbees and have you configured them at all?
- kennymac64
- Posts: 5
- Joined: Wed Mar 18, 2015 12:59 am
Re: XBEE 1 isnt talking to XBEE2
Firmware version: 22A7
Config changes: Changed baud rate from 9600 to 19200 and then back to 9600
I have confirmed that both are set to 9600.
Thanks
Config changes: Changed baud rate from 9600 to 19200 and then back to 9600
I have confirmed that both are set to 9600.
Thanks
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: XBEE 1 isnt talking to XBEE2
Are these both series1 xbees? If they are series1 then follow these instructions to set them to communicate.
- Franklin97355
- Posts: 23911
- Joined: Mon Apr 21, 2008 2:33 pm
Re: XBEE 1 isnt talking to XBEE2
You need to set those up to communicate. They do not work "out of the box" There is some good info here http://www.faludi.com/ and on Google
- kennymac64
- Posts: 5
- Joined: Wed Mar 18, 2015 12:59 am
Re: XBEE 1 isnt talking to XBEE2
cool, thanks!
Please be positive and constructive with your questions and comments.