I'm would like to upload the 7 segment clock to my Monochron.
I'm using my Arduino UNO as an AVR-ISP with the AVR-ISP example that came with the board.
my Avrdude command looks like this:
c:\acrdude -c arduino -p m328p -P com8 -b 57600 -U flash:w:monochron.hex
I get this error message:
avrdude: stk500_getsync<>: not in sync: resp=0x1c
avrdude done. Thank you.
Help please
Robert
problem uploading HEX file to Monochron clock
Moderators: adafruit_support_bill, adafruit
Please be positive and constructive with your questions and comments.
-
- Posts: 4
- Joined: Thu Apr 05, 2012 4:49 pm
-
- Posts: 4
- Joined: Thu Apr 05, 2012 4:49 pm
Re: problem uploading HEX file to Monochron clock
problem solved
I lowered the speed down to 9600 and it worked fine.
Robert
I lowered the speed down to 9600 and it worked fine.
Robert
Please be positive and constructive with your questions and comments.